Baojun Yueye/Yueye Plus is listed for less than 100,000 yuan and has four seats.

Wuling and Baojun, two brothers, are very active in the pure tram market. Unlike many car companies that make compact cars and SUVs, their cars are particularly popular. The family recently went public, including the 2024 Baojun Yuehe.

Bao jun yue ye Plus

Among the Yueye family listed this time, Yueye Plus is obviously the one that attracts more attention. Because this is a brand-new model with four complete doors, it is more in line with the demand of our domestic consumers for new cars. Even a personalized car can’t escape the category of daily use.

Yueye Plus is still positioned as a small car, but its body size has increased significantly, with a length of a little less than 4 meters, specifically 3996mm and a wheelbase of 2560mm, which is 615mm and 450mm higher than that of Tiffany Ting. If the tailgate is counted, the number of cars will increase from three to five. It is easy to distinguish in appearance.

This has also brought about an obvious increase in the space inside the car. Four people can sit down seriously, and there is still room for luggage in the trunk. This is very practical for our traditional Chinese family.

There are two versions in the whole system, the flagship version and the Zhizun version, with a guide price of 9.38-103,800 yuan, which is already the price level of an ordinary household compact plug-in car. Of course, the corresponding configuration has also changed. The battery capacity has become higher, reaching 41.9kWh, which can achieve 401km battery life under CLTC standard. At this price, such endurance performance is reasonable.

On the configuration level, the low-profile flagship version is equipped with front and rear radar, cruise control, keyless entry, external discharge, automatic headlights, induction wiper, electric folding/heating of exterior rearview mirror, electric adjustment of main driver’s seat and automatic air lift.

Wisdom Edition adds L2 driver assistance, transparent chassis and driving recorder. Among them, the most important ones are intelligent driving, high-speed navigation system, automatic lane change, entering and leaving ramps, tracking and reversing, remote parking and so on. The difference of10,000 yuan is actually mostly in the smart driving.

2024 Baojun Yueye

The new Yueye, that is, the two versions that existed before, has been updated this time, mainly in some details, and has remained basically unchanged. The most intuitive change is the change of wheel shape. It’s hard to say which one looks good, the old one or the new one. In addition, the color of the car has also increased three models, namely, Yunhai White, Mountain Fog Grey and Xiaguang Blue, with more choices.

The front central armrest box has been added to the interior of the car, which should be praised, especially for long-distance driving. It can also increase storage space. However, the price has also increased in 1000 yuan, which is somewhat smaller.

Generally speaking, Bao Junyue has not changed much, but the highlights are still those, such as the only intelligent driving ability at the same level, 50kW motor, 303km battery life, intelligent car system and good functional configuration.

As far as the price range of 80,000-90,000 is concerned, it is a very reasonable price with such performance and personalized body. But after all, it is a play-oriented model, and the sales volume is not much higher.

Who are competing products?

To say that the competing products of Baojun Yueye are actually not easy to find, most of them are ordinary family cars at this price, such as,, geometric E fireflies. BYD’s is relatively close.

But because of this, Yueye’s personalization is the first choice for many users who don’t like traditional cars or SUV models. They are usually young-minded, maybe they just graduated from college, or they are the second car at home. I don’t care much about battery life, space and face. Conversely, if there is a need for a family car and you want to have a long battery life, then Yue will be excluded from the first step.

Yueye Plus fills this gap well and is suitable for young consumer groups who are not bound by traditional ideas, pursue individuality and have certain family travel needs. They prefer to have the ability to travel by 3-4 people occasionally, and the battery life should not be too long. There is a little more space and go on road trip is more convenient. The budget of around 100,000 yuan is not expensive compared with Tiffany Ting.

Judging from the price and body parameters, it is a pity that neither Yue nor Yue Plus can apply for Shanghai brand for free in Shanghai. At present, among Baojun’s new energy sources, only it meets Shanghai’s free Shanghai brand application standard. Of course, in most parts of the country, you can enjoy the green card preferential policy.

Then there is smart driving, which is a major direction of the current "volume" of new energy vehicles. Whether it is Bao Junyue or Bao Junyue Plus, it is almost the strongest existence of 100,000 levels. The price to pay for this is also very small, about 10 thousand yuan.

This time, the price of Baojun’s Yueye Plus is quite surprising, which is not much higher than that of Tiffany Ting. Not only is the car body lengthened, but the battery is also bigger, making it easier to use the car. Whether it is Bao Junyue or Bao Junyue Plus, they all have quite individual body design, and their performance and configuration are all ok. As said at the press conference, smart driving is their advantage. It is really rare to achieve high-speed NOA at this level.

Announcement of Listed Companies in Shenzhen (October 9)

  Xingxin New Materials: Signed a Joint Research Agreement with Tsinghua University. 

  () Announcement, the company signed a cooperation agreement with Tsinghua University Institute of Environment on the joint research center of piperazine absorbents. The agreement period is three years, and Xingxin New Materials will provide a total of not less than 15 million yuan, including 2 million yuan for operation. The purpose of the agreement is to design and develop new high-performance piperazine derivative materials and promote the application of industrial flue gas desulfurization and decarbonization technologies. This cooperation will not have a significant impact on the company’s short-term performance and financial situation, but will help to enhance the company’s innovation ability and conform to the long-term strategic plan.

  Xingxin New Materials: Signed the Cooperation Agreement of Tsinghua University (Institute of Environment)-Shaoxing Xingxin New Materials Co., Ltd. Piperazine Absorbents Joint Research Center with Tsinghua University for 15 million yuan.

  Xingxin New Materials announced that the company recently signed the Cooperation Agreement between Tsinghua University (Institute of Environment) and Shaoxing Xingxin New Materials Co., Ltd. Joint Research Center for Piperazine Absorbents with Tsinghua University. Based on the principle of "friendly cooperation, mutual benefit, complementary advantages and common development", the two parties jointly established the "Tsinghua University (Institute of Environment)-Shaoxing Xingxin New Materials Co., Ltd. Joint Research Center for Piperazine Absorbents". The term of this agreement is three years, and it will take effect from the date of signature and seal by both parties. Within the validity period of this agreement, Party A shall provide the joint research center with accumulated funds of not less than 15 million yuan for three years, including 2 million yuan for operation, which shall be paid in three years: 6 million yuan in the first year, 5 million yuan in the second year and 4 million yuan in the third year. The construction goal of the joint research center is to design and develop new high-performance piperazine derivative materials, carry out comprehensive evaluation and testing, develop process packages, and promote the transformation and application of key technological achievements. Using the company’s own funds to pay for this cooperation will help expand the company’s future development space, enhance the company’s sustainable development ability and innovation ability, and will not have a significant impact on the company’s current operating performance. There are certain cycles and inherent risks in R&D projects, and the company will pay close attention to the subsequent progress and fulfill its information disclosure obligations in a timely manner.

  Beijing Kerui: It is planned to invest 750 million yuan in energy storage power station project.

  () Announcement, the company signed the Investment Agreement with the people’s government of Xiushan Tujia and Miao Autonomous County, and plans to invest in the construction of an independent energy storage power station in Xiushan County, Chongqing, with a total investment of about 750 million yuan. The scale of the project is 250MW/500MWH, and the construction contents include battery compartment container, control room and power distribution room. The agreement still needs to be approved by the company’s shareholders’ meeting, and the project implementation is uncertain.

  Alloy Investment: Electing the Chairman of the 12th Supervisory Committee of the Company.

  () It was announced that the company held the 13th meeting of the 12th Board of Supervisors on September 30th, 2024, and the Board of Supervisors elected Ms. Li Wenjuan as the chairman of the 12th Board of Supervisors, with the term of office from the date of deliberation and approval by the Board of Supervisors to the date of expiration of the 12th Board of Supervisors. Ms. Li Wenjuan was born in October 1985. She is of China nationality and has no permanent residency abroad. She is a graduate student and a senior corporate compliance engineer in party member, CPC. Have relevant qualifications, qualifications and certificates, etc. At present, he is the representative of securities affairs and the minister of securities department of () Co., Ltd. He once held many positions such as Guanghui Energy Co., Ltd.. As of the disclosure date of this announcement, Ms. Li Wenjuan does not hold shares in the company, has no relationship with relevant personnel of the company, has not been punished or disciplined, has not been placed on file for investigation due to suspected crimes, and there is no situation that she cannot be nominated as a supervisor, which meets the relevant qualifications.

  Zhongtong Bus: Sales in September 2024 increased by 62.47% year-on-year.

  () Announcement, the sales volume in September 2024 was 808 vehicles, and the cumulative sales volume this year was 8541 vehicles, up 62.47% year-on-year.

  Xugong Machinery has spent 300 million yuan to buy back 47,033,300 shares.

  () Announcement was issued. As of September 30, 2024, the company repurchased 47,033,300 shares of the company by centralized bidding, accounting for 0.40% of the company’s current total share capital. The highest transaction price was 6.67 yuan/share, the lowest transaction price was 6.17 yuan/share, and the total turnover was 300 million yuan.

  Lizhong Group: won the fixed-point contract of 5.53 billion yuan for aluminum alloy wheels.

  () Announcement, the company’s subsidiaries Xintai Wheel, Mexico Lizhong and Baoding Lizhong respectively signed fixed-point contracts for aluminum alloy wheel projects with an internationally renowned automobile manufacturer and a new energy head automobile manufacturer. Customer 1 project is expected to be mass-produced in early 2025, with a life cycle of 10 years and an estimated sales amount of 5.24 billion yuan; Customer 2 project is expected to be mass-produced in May 2025, with a life cycle of 5 years and an estimated sales amount of 290 million yuan. The total estimated sales of the two projects is about 5.53 billion yuan, which will have a positive impact on the company’s future performance, but the supply is uncertain.

  Jiangling motors: In September, the car sales volume was 27,850.

  This year’s cumulative sales volume is 242,200 vehicles.

  On October 8th, () it was announced that in September 2024, the automobile sales volume was 27,850, up by 1.06% year-on-year; This year’s cumulative sales volume was 242,200 vehicles, up 9.56% year-on-year.

  Tianli Lithium Energy: 1,537,900 shares have been repurchased.

  On the evening of October 8, () announced that from December 25, 2023 to September 30, 2024, the company repurchased 1,537,900 shares by centralized bidding through the repurchase special securities account, accounting for 1.2608% of the company’s total shares.

  Zhongtong Bus: 808 vehicles were sold in September.

  Zhongtong Bus announced on the evening of October 8 that it sold 808 vehicles in September 2024; This year, the cumulative sales volume was 8,541 vehicles, a year-on-year increase of 62.47%.

  Beijing Kerui: It is planned to invest about 750 million yuan to build an independent energy storage power station in Xiushan County, Chongqing.

  Beijing Kerui announced on the evening of October 8 that the company recently signed the Investment Agreement with the people’s government of Xiushan Tujia and Miao Autonomous County in Chongqing. The company plans to invest about 750 million yuan to build an independent energy storage power station in Xiushan County, Chongqing, with a construction scale of 250MW/500MWH.

  Wilty: I have completed the formalities for changing the industrial and commercial registration and obtained the business license.

  On the evening of October 8th, () announced that the company held the 12th (temporary) meeting of the 8th Board of Directors on September 19th, 2024, reviewed and passed the Proposal on Electing the Chairman of the 8th Board of Directors, and elected Mr. Chen Heng as the chairman of the company. According to the Articles of Association of Shanghai Weiertai Industrial Automation Co., Ltd., the chairman of the board is the legal representative of the company. Therefore, the company recently completed the procedures for changing the industrial and commercial registration of the legal representative of the company and obtained the Business License renewed by Shanghai Municipal Market Supervision Administration.

  Zhefu Holdings has repurchased 1.0491% of the shares at a cost of about 173 million yuan.

  () Announcement was issued. As of September 30, 2024, the company repurchased 54,756,300 shares of the company by centralized bidding through the special securities account for share repurchase, accounting for 1.0491% of the company’s current total share capital. The highest transaction price was 369 yuan/share, the lowest transaction price was 268 yuan/share, and the total transaction amount was 173 million yuan.

  Chenguang Bio has bought back 9.32% of the shares at a cost of 492 million yuan.

  () Announcement: As of September 30, 2024, the company repurchased 49,673,900 shares of the company by centralized bidding, with a turnover of 492 million yuan (excluding transaction costs), and the share repurchased this time accounted for 9.32% of the company’s total share capital.

  Zhongrong Shares: Announcement on the Progress of Share Repurchase

  () "The announcement said," As of September 30, 2024, the company repurchased 568,100 shares of the company by centralized bidding, accounting for 0.29% of the company’s total share capital. The highest transaction price was 14.55 yuan/share, the lowest transaction price was 14.11 yuan/share, and the total transaction amount was 8.105 million yuan (excluding transaction costs). The company’s share repurchase this time meets the requirements of relevant laws and regulations and the company’s established share repurchase plan. The time, quantity, price and entrusted time period of the company’s share repurchase are all in line with the relevant provisions of the Rules for Share Repurchase of Listed Companies, the Self-regulatory Guidelines for Listed Companies of Shenzhen Stock Exchange No.9-Share Repurchase, and the company’s share repurchase plan. The company did not buy back the shares during the period when it was not allowed to buy back, and the centralized bidding transaction also met the relevant requirements. The company will continue to implement this repurchase plan within the repurchase period according to market conditions, and will fulfill its information disclosure obligations in a timely manner in accordance with relevant laws, regulations and normative documents.

  Dazu Laser has repurchased 1.17% of the shares, costing about 250 million yuan.

  () Announcement was issued. As of September 30, 2024, the company repurchased 12,310,400 shares of the company by centralized bidding through the special securities account for stock repurchase, accounting for 1.17% of the company’s current total share capital. The highest transaction price was 2.136 yuan/share, the lowest transaction price was 1.541 yuan/share, and the total transaction amount was 250 million yuan.

  Hangjin Technology has repurchased 2.4424% of the shares at a cost of about 339 million yuan.

  () Announcement was issued. As of September 30, 2024, the company repurchased 16.588 million shares of the company through the special securities account for share repurchase, accounting for 2.4424% of the company’s latest total share capital. The highest transaction price was 3.015 yuan/share, and the lowest transaction price was 1.407 yuan/share, with a turnover of 339 million yuan.

  Lichen Industry: Progress of Share Repurchase of the Company

  () "According to the announcement, the company held the first extraordinary shareholders’ meeting in 2024 on August 13, 2024, and reviewed and approved the Proposal on Repurchase of the Company’s Shares to Stabilize the Stock Price. As of September 30, 2024, the number of shares repurchased by the company through the repurchase special securities account by centralized bidding transaction was 1,126,200 shares, accounting for 0.8554% of the company’s total share capital. The highest transaction price was 14.76 yuan/share, the lowest transaction price was 13.10 yuan/share, and the total transaction amount was 15,400,500 yuan (excluding transaction fees). The above repurchased shares comply with relevant laws and regulations and the provisions of the company’s share repurchase plan. The company will continue to implement the repurchase plan within the repurchase period according to the share repurchase plan, combined with market conditions and funding arrangements, and will fulfill its information disclosure obligations in a timely manner in strict accordance with relevant regulations. "

  Zhefu Holdings: Progress of Share Repurchase as of September 30.

  Zhefu Holdings announced that as of September 30, 2024, the company repurchased 54,756,300 shares of the company by centralized bidding through the special securities account for share repurchase, accounting for 104.91% of the company’s current total share capital of 5,219 million shares. The highest transaction price was 369 yuan/share, the lowest transaction price was 268 yuan/share, and the total transaction amount was 173 million yuan (excluding transaction costs). The implementation of the company’s share repurchase conforms to the requirements of relevant laws, regulations and normative documents, and conforms to the established repurchase plan. The company will continue to implement this repurchase plan within the repurchase period according to market conditions, and fulfill its information disclosure obligations in a timely manner according to the requirements of relevant laws, regulations and regulatory documents.

  Sichuan Shuangma: Progress in Repurchase of Company Shares

  () According to the announcement, at the third meeting of the ninth board of directors held on October 23, 2023, the company passed the proposal to buy back the shares of the company, and used its own funds to buy back the shares for the employee stock ownership plan or equity incentive plan by centralized bidding. The total amount of repurchase funds is not less than 50 million yuan (inclusive) and not more than 100 million yuan (inclusive), and the repurchase price is not more than 21.66 yuan/share. The repurchase period is 12 months from the date when the board of directors deliberates and approves the repurchase plan. By September 30, 2024, the company had repurchased 6,219,900 shares, accounting for 0.81% of the company’s total share capital. The highest transaction price was 17.81 yuan/share, the lowest transaction price was 11.37 yuan/share, and the total transaction amount was 88,252,200 yuan (excluding transaction costs), which met the company’s established share repurchase plan and laws and regulations. In September 2024, the company did not violate the relevant regulations, and will continue to implement this share repurchase plan within the repurchase period according to market conditions, and fulfill its information disclosure obligations in a timely manner.

  A number of subsidiaries of Lizhong Group won fixed-point contracts for aluminum alloy wheel projects.

  Lizhong Group announced that its subsidiaries Xintai Wheel, Mexico Lizhong and Baoding Lizhong have recently received fixed-point contracts for aluminum alloy wheel projects from an internationally renowned automobile manufacturer and a new energy head automobile manufacturer respectively.

  Customer 1 project is expected to start mass production in early 2025, with a life cycle of 10 years, and the estimated sales amount during the project cycle is about 5.24 billion yuan; The Customer 2 project is expected to start mass production in May 2025. The life cycle of the project is 5 years, and the estimated sales amount during the project cycle is about 290 million yuan. Customer 1 and Customer 2 estimate that the total sales during the project period is about 5.53 billion yuan. This designated project does not rule out the possibility of sharing products with other subsequent projects.

  Zhengbang Technology: The sales revenue of live pigs in September increased by 102.76% year-on-year.

  () Announcement: In September, 2024, 380,800 live pigs were sold, up by 37.48% month-on-month and 14.35% year-on-year. The sales revenue was 513 million yuan, up by 12.46% month-on-month and up by 102.76% year-on-year.

  Fuchun environmental protection: resignation of company supervisors and by-election of supervisors

  () It is announced that the Board of Supervisors of the Company recently received a written resignation report from Ms. Xiong Pingping, a non-employee representative supervisor, who applied to resign as a non-employee representative supervisor of the Sixth Board of Supervisors due to work arrangements, and will no longer hold any position in the company after her resignation. Her resignation application will take effect when it is delivered to the Board of Supervisors. As of the disclosure date of the announcement, Ms. Xiong Pingping does not hold the company’s shares, and there are no commitments that should be fulfilled but not fulfilled. In addition, in order to ensure the standardized operation of the Company’s Board of Supervisors, the Company held the seventh meeting of the Sixth Board of Supervisors on October 8, 2024, and agreed to nominate Mr. Li Xiwen as a candidate for the non-employee representative supervisor of the Sixth Board of Supervisors, with the term of office from the date of deliberation and approval by the shareholders’ meeting to the date of expiration of the term of the Sixth Board of Supervisors. The proposal still needs to be submitted to the company’s third extraordinary shareholders meeting in 2024 for consideration.

  Zhengbang Technology: The sale of live pigs was announced in September 2024.

  Zhengbang Technology announced that in September 2024, the company sold 380,800 pigs (including 206,000 piglets and 174,800 commercial pigs), up 37.48% from the previous month and 14.35% from the same period last year. Sales revenue was 513 million yuan, up 12.46% from the previous month and 102.76% from the same period last year. The average selling price of commercial pigs (excluding piglets) was 18.62 yuan/kg, down 5.58% from last month; The average weight was 133.72 kg/head, up 1.42% from last month. From January to September 2024, the company sold a total of 2,476,800 pigs, down 40.14% year-on-year; Cumulative sales revenue was 3.093 billion yuan, down 19.00% year-on-year. In September, 2024, the company’s pig sales increased significantly month-on-month, mainly due to the adjustment of the company’s business strategy, and the year-on-year increase in pig sales revenue was mainly due to the year-on-year increase in the sales price and sales weight of the company’s commercial pigs. From January to September, 2024, the year-on-year decline in the number of live pigs sold by the company was mainly due to the adjustment of the company’s business strategy. At the same time, it is suggested that the risk of price fluctuation in the pig market is a systematic risk of the whole pig production industry, an objective and uncontrollable external risk, which may have a significant impact on the company’s operating performance.

  Keming Food: The sales of live pigs in September decreased by 59.61% year-on-year.

  () Announcement: Xinjiang Muge, a holding subsidiary, sold 13,800 pigs in September 2024, down 40.25% year-on-year, and its sales income was 16,103,900 yuan, down 59.61% year-on-year. From January to September, the cumulative sales of pigs was 284,800, a decrease of 19.36% compared with the same period of last year; The cumulative sales revenue was 344 million yuan, a decrease of 25.92% compared with the same period last year.

  Keming Food: Sales of live pigs in September 2024

  Keming Food announced that its holding subsidiary Aksu Xingjiang Muge Food Co., Ltd. sold 13,800 pigs in September 2024, with a sales volume increase of 6.12% from the previous month and a year-on-year decrease of 40.25%. The sales revenue was 16,103,900 yuan, which decreased by 4.28% month-on-month and 59.61% year-on-year. From January to September 2024, the company sold a total of 284,800 pigs, a decrease of 19.36% compared with the same period of last year; The accumulated sales revenue was 343,532,000 yuan, a decrease of 25.92% compared with the same period of last year. In September, 2024, the year-on-year decline in the number and income of live pigs was mainly due to the fact that in order to ensure the stability of cash flow in the early stage, the piglets with good market and rapid turnover were mainly sold in the early stage, which led to the decrease in the sales of commercial fat pigs in this period; With the decline of piglet market, the sales of piglets were reduced in this period. At the same time, the above sales only represent the sales of Xinjiang pastoral pig breeding business, and the operation of other business segments of the company is not included. The risk of price fluctuation in the pig market is a systematic risk of the whole pig production industry, and it is an objective and uncontrollable external risk for any pig producer. The large fluctuation of the market price of live pigs may have a significant impact on the company’s operating performance.

  Zhengbang Technology: In September, 380,800 pigs were sold, up 37.48% from the previous month.

  Zhengbang Technology announced that it sold 380,800 pigs in September (including 206,000 piglets and 174,800 commercial pigs), up 37.48% from the previous month and 14.35% from the same period last year. Sales revenue was 513 million yuan, up 12.46% from the previous month and 102.76% from the same period last year.

  From January to September, the company sold a total of 2,476,800 pigs, down 40.14% year-on-year; Cumulative sales revenue was 3.093 billion yuan, down 19.00% year-on-year.

  Invigorate: the progress of repurchasing company shares

  () "The announcement said that as of September 30, 2024, the company used its own funds to repurchase 6.57 million shares of the company by centralized auction trading through the special securities account, accounting for 0.81% of the company’s current total share capital. The lowest transaction price was 5.38 yuan/share, the highest transaction price was 5.74 yuan/share, and the total transaction amount was 36.5345 million yuan (excluding transaction costs). This repurchase meets the requirements of the company’s share repurchase plan and relevant laws and regulations. The time for the company to buy back shares, the number of shares repurchased and the entrustment period of centralized bidding transactions are in compliance with relevant regulations. The company will continue to implement this repurchase plan during the repurchase period according to market conditions and capital arrangements. During the repurchase period, the company will fulfill its information disclosure obligations in accordance with relevant laws, regulations and normative documents. "

  Weining Health: As of September 30, 2024, share repurchase has not been implemented.

  () According to the announcement, it held the sixth meeting of the sixth board of directors on September 5, 2024 and September 23, 2024 respectively, and the second extraordinary general meeting of shareholders in 2024 deliberated and passed the Proposal on the Plan of Repurchase of Company Shares. The company intends to use its own funds to repurchase some shares of the company by centralized bidding, and all the repurchased shares will be cancelled and the registered capital will be reduced accordingly. The total amount of shares repurchased this time is not less than RMB 40 million and not more than RMB 80 million (inclusive), the price of repurchased shares is not more than RMB 8 yuan/share (inclusive), and the period for repurchasing shares is not more than 12 months from the date when the company’s shareholders’ meeting deliberated and approved this repurchase plan. As of September 30, 2024, the company has not implemented share repurchase. The company will implement this repurchase plan within the repurchase period according to market conditions, and will fulfill its information disclosure obligations in a timely manner according to relevant laws, regulations and normative documents during the repurchase period.

  Jitai shares: the progress of repurchasing shares of the company

  () "The announcement said that the company held the second meeting of the fourth board of directors on July 19, 2024, and reviewed and approved the Proposal on the Share Repurchase Plan of the Company. On July 23, 2024, the repurchase was first implemented by centralized bidding through the special securities account for repurchase. By September 30, 2024, the company had bought back 2,652,700 shares of the company by centralized bidding, accounting for 0.67% of the current total share capital. The highest transaction price was 3.89 yuan/share, the lowest transaction price was 3.54 yuan/share, and the transaction amount was 9,993,300 yuan (excluding transaction costs). The source of funds for the share repurchase is the company’s own funds, and the repurchase price does not exceed the upper limit of the repurchase price of 6.13 yuan/share (inclusive) proposed in the repurchase plan. This repurchase complies with the requirements of relevant laws and regulations and the company’s established share repurchase plan. The time and quantity of the company’s repurchase and the entrusted time period of centralized bidding transactions are in compliance with the regulations. If the shares are not repurchased within a specific period, the relevant requirements will be met when the shares are repurchased by centralized bidding. In the future, this repurchase plan will be implemented within the repurchase period according to market conditions, and the information disclosure obligations will be fulfilled in a timely manner. "

  Seagull Residence: Progress of Share Repurchase as of September 30, 2024

  () According to the announcement, as of September 30, 2024, the company repurchased 6,138,200 shares by centralized bidding through the special securities account for stock repurchase, accounting for about 0.94% of the company’s current total share capital. The highest transaction price was 3.04 yuan/share, the lowest transaction price was 2.30 yuan/share, and the total transaction amount was 16,928,400 yuan (excluding transaction costs). This repurchase complies with the requirements of relevant laws and regulations and the company’s repurchase plan. The time, quantity, price of shares repurchased by the company and the entrustment period of centralized bidding transactions are in compliance with relevant regulations. The company will implement this repurchase plan within the repurchase implementation period according to market conditions, and fulfill its information disclosure obligations in a timely manner according to relevant regulations.

  Keming Food: The sales volume of live pigs in Xinjiang Pastoral in September increased by 6.12% from the previous month and decreased by 40.25% from the same period last year.

  Keming Food announced that Xingjiang Muge, a holding subsidiary of the company, sold 13,800 pigs in September 2024, with sales volume increasing by 6.12% month-on-month and decreasing by 40.25% year-on-year. The sales revenue was 16,103,900 yuan, which decreased by 4.28% month-on-month and 59.61% year-on-year.

  From January to September, the company sold a total of 284,800 pigs, a decrease of 19.36% compared with the same period of last year; The accumulated sales revenue was 343,532,000 yuan, a decrease of 25.92% compared with the same period of last year.

  The year-on-year decline in the number and income of live pigs in September was mainly due to the fact that in order to ensure the stability of cash flow in the early stage, piglets with better market and faster turnover were mainly sold in the early stage, which led to the decrease in the sales of commercial fat pigs in this period; With the decline of piglet market, the sales of piglets were reduced in this period.

  Yingluohua has repurchased 1.66% of the shares at a cost of about 106 million yuan.

  () Announcement was issued. As of September 30, 2024, the company had repurchased 18,869,700 shares of the company by centralized bidding through the special securities account, accounting for 1.66% of the company’s total share capital. The highest transaction price was 6.00 yuan/share, the lowest transaction price was 5.06 yuan/share, and the total transaction amount was 106 million yuan.

  Happy Home bought back 26.8 million shares at a cost of 349 million yuan.

  () Announcement: As of September 30, 2024, the company repurchased 26.8 million shares of the company by centralized bidding, with a total transaction amount of 349 million yuan (excluding transaction fees such as trading commissions).

  Wavelength Optoelectronics will send 0.7 yuan date of record every 10 shares in the first half of 2024 as October 14th.

  () Announced, the contents of the company’s equity distribution implementation plan for the first half of 2024 are as follows: based on the total share capital of 115,718,000 shares, a cash dividend of 0.70 yuan will be distributed to all shareholders for every 10 shares, and a total cash dividend of 8,100,300 yuan will be distributed, accounting for 28.13% of the net profit attributable to the mother in the same period. No bonus shares will be distributed and no capital reserve will be converted into share capital. 

  The distribution of rights and interests in date of record is October 14th, and the ex-dividend date is October 15th. 

  According to the 2024 semi-annual performance report released by Wavelength Optoelectronics, the company’s operating income was 190 million yuan, a year-on-year increase of 3.76%; The net profit attributable to shareholders of listed companies was 28.7956 million yuan, a year-on-year decrease of 16.67%; The basic earnings per share was 0.25 yuan, compared with 0.40 yuan in the same period last year. 

  Nanjing Wavelength Optoelectronic Technology Co., Ltd. is mainly engaged in the research, development, production and sales of precision optical components and components, and provides overall solutions for all kinds of optical equipment, optical design and optical detection. The company’s main products are beam expanding lens, scanning lens, focusing lens, collimating lens, infrared thermal imaging lens, near-infrared lens, short-wave infrared lens, medium-wave infrared lens, long-wave infrared lens, ZEMAX software &Photon Design software and optical detection series. As a state-level high-tech enterprise and a state-level "little giant" enterprise, the company has more than 130 patents authorized and mastered many core technologies such as "design and preparation of optical films" and "manufacturing technology of high-power laser lenses".

  (Source: () iFinD)

  Zhenyu Technology: It is planned to invest no more than 120 million yuan in Martin Robot, a wholly-owned subsidiary.

  On October 8th, () announced that the company intends to invest in Martin Robot, a wholly-owned subsidiary, with its own or self-raised funds, with the investment amount not exceeding 120 million yuan.

  The announcement shows that Martin Robot’s main business includes research and development, production, processing and sales of precision parts for industrial robots and intelligent robot actuators.

  Zhenyu Technology said that this investment in the subsidiary strives to upgrade and break through the company’s business again and realize the company’s sustainable development. This foreign investment conforms to the company’s own strategic layout and business development needs.

  Xiangxin Technology: Winning the bid for 300-400 million yuan super charging pile project.

  () Announcement: Recently, the company received a bid-winning notice from a domestic digital energy head customer, and was identified as the supplier of the final assembly and structural parts of air-cooled and liquid-cooled super charging piles. The estimated total sales of the project is 300-400 million yuan, and the life cycle of the project is 1-2 years. The bid-winning notice of the project does not constitute a substantive order, and the actual delivery time, price and quantity of the product are subject to the customer’s subsequent formal supply agreement or sales order.

  Wavelength Optoelectronics plans to send 10 shares to 0.7 yuan for ex-dividend on October 15th.

  Wavelength Optoelectronic announced that the company’s half-year equity distribution in 2024 is planned to distribute cash 0.7 yuan (including tax) to all shareholders for every 10 shares. Ex-dividend date: October 15, 2024.

  Xingxin New Materials: Signed a cooperation agreement with Tsinghua University to establish a joint research center.

  Xingxin New Materials announced on the evening of October 8th that the company recently signed the Cooperation Agreement between Tsinghua University (Environmental College) and Shaoxing Xingxin New Materials Co., Ltd. Joint Research Center for Piperazine Absorbents with Tsinghua University and Tsinghua University Environmental College as the specific organizer. In the field of piperazine absorbents, the two parties will make full use of the development achievements, experience and platform of the Environmental Institute in the collaborative control technology of air pollutants and greenhouse gases, and combine the advantages of the company’s piperazine and its derivatives in the field of flue gas desulfurization and decarbonization to jointly establish the "Tsinghua University (Environmental Institute)-Shaoxing Xingxin New Materials Co., Ltd. Joint Research Center for piperazine absorbents".

  Osekan: It is planned to increase the capital of AskGene by 220 million yuan.

  () Announcement: AskGene is a holding subsidiary of the company, and Sea Glory Group Limited and Shanghai Taifu Jintong Enterprise Management Partnership intend to increase the capital of AskGene by 220 million yuan and 30 million yuan. After the capital increase, the proportion of shares issued by AskGene held by Osekan increased from 59.07% to 62.86%. The capital increase funds are mainly used for daily operation, research and development of AskGene.

  Fruit and wheat culture: the company will fulfill its information disclosure obligations in accordance with regulations if it has mergers and acquisitions or foreign investment projects.

  Some investors asked () on the interactive platform: Hello, Secretary-General, Lu Jinbo, the company’s actual controller, is Han Han’s publisher. They have cooperated for many years and participated in many publishing projects and film production. Many of Han Han’s explosive films all involved Lu Jinbo or Guomai culture. Will Guomai culture consider the merger or asset reorganization of Han Han’s Tingdong film industry in the future, so as to optimize and integrate resources and jointly strengthen its competitiveness in the film and television industry?

  The company replied that the company will fulfill its information disclosure obligations in accordance with relevant regulations if it has mergers and acquisitions or foreign investment projects. Please refer to the company announcement.

  Jieshun Technology: Announcement on the Progress of Share Repurchase

  () According to the announcement, as of September 30, 2024, the company repurchased a total of 3.65 million shares of the company by centralized bidding through the repurchase special securities account, accounting for 0.56% of the company’s total share capital of 647 million shares. The highest transaction price was 7.30 yuan/share, and the lowest transaction price was 6.54 yuan/share, with a total transaction amount of 25.4858 million yuan (excluding transaction costs). This share repurchase is in line with the company’s share repurchase plan and the requirements of relevant laws and regulations. The time, price and entrustment period of the company’s share repurchase are in compliance with the relevant regulations. The company failed to repurchase shares in a specific period, and repurchased shares in a centralized bidding transaction met specific requirements, and did not simultaneously implement share repurchase and share issuance. The funds for this share repurchase come from the company’s own funds and can be put in place in time. The company will continue to implement share repurchase within the repurchase period according to market conditions, and fulfill its information disclosure obligations in a timely manner according to relevant regulations.

  Zhefu Holdings: Termination of Investment in Deyang Project in Sichuan

  Zhefu Holdings announced on the evening of October 8 that recently, Tonglu Shenlian, a holding subsidiary of the company, and Deyang Kaizhou New Town Management Committee signed the Termination Agreement of Industrial Resources Comprehensive Utilization Project of Hangzhou Tonglu Shenlian Environmental Investment Development Co., Ltd., Deyang Kaizhou New Town Management Committee. Up to now, the project has not been smoothly promoted due to policy reasons. In view of the fact that this project has not been implemented and no actual investment has taken place, the termination of investment in Deyang project in Sichuan will not have a significant impact on the company’s financial situation and operating results.

  Jiu’ an Medical has repurchased 5.96% of the shares at a cost of about 1.18 billion yuan.

  () Announcement was issued. As of September 30, 2024, the company repurchased a total of 29,226,300 shares of the company through the special securities account for stock repurchase, accounting for 5.96% of the company’s total share capital. The highest transaction price was 41.277 yuan/share, the lowest transaction price was 3,942 yuan/share, and the total payment amount was 1.18 billion yuan.

  Tomson Bianjian bought back 15.737 million shares at a cost of 250 million yuan.

  () Announcement: As of September 30, 2024, the company has repurchased 15.737 million shares in the first phase through the special repurchase account with a total payment of RMB 250 million (excluding transaction costs). At the same time, the company has not implemented the second repurchase.

  (): Stock trading fluctuated abnormally, and the cumulative closing price for two consecutive trading days deviated by -14.40%.

  ST Bailing "announced the change", and the closing price of ST Bailing stock (stock abbreviation: ST Bailing, stock code: 002424) deviated from -14.40% for two consecutive trading days (September 30, 2024 and October 8, 2024). The company has not found any information that needs to be corrected or supplemented in the previous period, and has not found any major undisclosed information that may or has had a great impact on the company’s stock trading price in the recent public media reports. The company’s current operating conditions and internal and external operating environment have not changed significantly. Upon verification, the Company, the controlling shareholder and the actual controller do not have any major matters that should be disclosed but not disclosed about the Company, or major matters in the planning stage. During the period of abnormal stock fluctuation, the controlling shareholder and the actual controller did not buy or sell the Company’s shares, and the Company did not have any undisclosed matters that caused serious abnormal stock trading. The Board of Directors of the Company confirms that the Company has no undisclosed matters according to relevant regulations. The company does not violate the fair disclosure of information. The company disclosed the relevant announcement on April 30, 2024, and was implemented with "Other Risk Warning" on May 6, 2024, and the stock abbreviation was changed to "ST Bailing".

  Zhengbang Technology: In September, the sales revenue of live pigs was 513 million yuan, up 102.76% year-on-year.

  Zhengbang Technology announced on the evening of October 8 that the company sold 380,800 pigs in September 2024, up 37.48% from the previous month and 14.35% from the same period last year. Sales revenue was 513 million yuan, up 12.46% from the previous month and 102.76% from the same period last year. The average selling price of commercial pigs (excluding piglets) was 18.62 yuan/kg, down 5.58% from last month. From January to September, the company sold a total of 2,476,800 pigs, a year-on-year decrease of 40.14%; Cumulative sales revenue was 3.093 billion yuan, down 19.00% year-on-year.

  The actual controller of China Rare Earth has accumulated 0.99% of the company’s shares.

  () Announcement was issued. As of October 8, 2024, more than half of the implementation time of this shareholding plan, China Rare Earth Group, the actual controller of the company, increased its shareholding by 10.494 million shares through the trading system of Shenzhen Stock Exchange, with an increase of 247 million yuan (excluding transaction costs), accounting for 0.99% of the company’s total share capital. The plan has not been implemented yet, and China Rare Earth Group will continue to implement the plan.

  Benli Technology: Progress of Share Repurchase

  () According to the announcement, as of September 30, 2024, the company has repurchased 2,847,400 shares of the company through the special securities account for share repurchase, accounting for 2.69% of the company’s current total share capital; The highest transaction price of repurchase is RMB 18.20/share, the lowest transaction price is RMB 14.59/share, and the total transaction amount is RMB 50,002,900 (excluding transaction costs). This share repurchase is in compliance with laws and regulations and the company’s share repurchase plan. The time for the company to buy back shares, the number of shares repurchased and the entrustment period of centralized bidding transactions are in compliance with relevant regulations. The company will continue to implement this repurchase plan within the repurchase period according to market conditions, and fulfill its information disclosure obligations in a timely manner according to relevant regulations.

  () It is estimated that the net profit from January to September in 2024 will be 1,820,830,300 yuan to 1,870,830,300 yuan, an increase of 91.05% to 96.29% over the previous year.

  Hudian shares announced that it expects earnings per share from January to September 2024: 0.95 yuan to 0.98 yuan. It is estimated that the net profit attributable to shareholders of listed companies from January to September 2024 will be 1,820,830,300 yuan to 1,870,830,300 yuan, an increase of 91.05% to 96.29% over the previous year. It is estimated that the net profit after deducting non-recurring gains and losses from January to September 2024 will be 1,781,471,100 yuan to 1,831,471,100 yuan, an increase of 102.97% to 108.66% over the previous year.

  The announcement shows that the company’s operating income and net profit in the third quarter of 2024 are expected to increase compared with the same period of last year, benefiting from the structural demand for printed circuit boards in emerging computing scenarios such as high-speed computing servers and artificial intelligence.

  According to the data, Hudian Co., Ltd. was established in 1992, located at No.1 Donglong Road, Yushan Town, Kunshan City, Jiangsu Province. It is an enterprise mainly engaged in the production, sales and related after-sales service of printed circuit boards. The registered capital of the enterprise is 1.915 billion RMB, and the legal representative is Chen Meifang.

  Through the analysis of big data from Tianyancha, Hushi Electronics Co., Ltd. has invested in 7 enterprises and participated in bidding projects for 320 times. There are 6 pieces of trademark information and 152 pieces of patent information in intellectual property rights; In addition, the enterprise also has 30 administrative licenses.

  Zhaofeng shares: the progress of repurchasing company shares

  () "The announcement said," As of September 30, 2024, the number of shares repurchased by the company by centralized bidding with its own funds through the special securities account was 857,200 shares, accounting for 1.21% of the company’s current total share capital. The highest transaction price was 43.49 yuan/share, the lowest transaction price was 32.92 yuan/share, and the total transaction amount was 31,652,700 yuan (excluding transaction fees). This repurchase meets the requirements of the company’s share repurchase plan and relevant laws and regulations. Due to the implementation of the semi-annual rights distribution in 2024, the price ceiling of the repurchased shares was adjusted from no more than RMB 56.50/share (inclusive) to no more than RMB 55.80/share (inclusive), and the adjusted price ceiling of the repurchased shares will take effect on October 11, 2024. The company will continue to implement this repurchase plan within the repurchase period according to market conditions, and will fulfill its information disclosure obligations in a timely manner according to the provisions of relevant laws, regulations and normative documents during the repurchase period.

  Tianlu Technology: Ma Changjian, the shareholder holding more than 5% shares, has completed the implementation of the reduction plan.

  () According to the announcement, Mr. Ma Changjian, a shareholder holding more than 5% of the company’s shares, reduced his holdings of 600,000 shares of the company through centralized bidding from August 15, 2024 to September 26, 2024, accounting for 0.5439% of the company’s total share capital, with an average reduction of 15.90 yuan/share. After the reduction, Ma Changjian holds 5,315,800 shares of the company, accounting for 4.8186% of the total share capital of the company. This equity change strictly abides by relevant regulations, and does not involve the change of the controlling shareholder and actual controller of the company, and will not affect the corporate governance structure and going concern of the company. This reduction plan has been pre-disclosed in accordance with the regulations, and has been implemented at present. The actual number of shares reduced is consistent with the previously disclosed reduction plan, and there is no violation.

  Jizhi Technology: 2,383,300 shares have been repurchased.

  On the evening of October 8, () announced that on February 6, 2024, the company repurchased the company’s shares through the special securities account for share repurchase for the first time in a centralized bidding transaction. As of September 30, 2024, the company has repurchased 2,383,300 shares of the company through the special securities account for share repurchase, accounting for 0.90% of the company’s total share capital.

  Changlv shares: Zang Yucheng was elected as a candidate for non-employee representative supervisor by-election.

  On the evening of October 8th, () announced that the company had recently received a written resignation report from Mr. Shao Yi, the supervisor, and that Mr. Shao Yi had applied to resign as the supervisor of the seventh board of supervisors of the company due to the adjustment of work arrangement. After his resignation, Mr. Shao Yi would continue to hold other positions in the company. On October 8, 2024, the Company held the 14th meeting of the 7th Board of Supervisors, and deliberated and passed the Proposal on By-election of Non-employee Representative Supervisors. The Board of Supervisors agreed to by-election Ms. Zang Yucheng as the candidate of the 7th Board of Supervisors, with the term of office from the date of deliberation and approval by the shareholders’ meeting to the date of expiration of the 7th Board of Supervisors.

  Xianying Technology: Progress of Share Repurchase as of September 30, 2024

  () "The announcement stated that the company held the 13th meeting of the third board of directors on February 6, 2024, and reviewed and approved the plan to buy back the shares of the company. It is agreed to buy back the shares of the company with its own funds of not less than RMB 20 million (inclusive) and not more than RMB 40 million (inclusive), and the price of the repurchased shares shall not exceed RMB 38 yuan/share (inclusive), and the repurchase period shall not exceed 12 months from the date of deliberation and approval by the board of directors. Due to the annual distribution of rights and interests in 2023, the price ceiling of repurchased shares is adjusted to not exceed 37.95 yuan/share (inclusive). As of September 30, 2024, the cumulative number of shares repurchased through the special securities account for stock repurchase by centralized bidding was 563,400 shares, accounting for 0.58% of the current total share capital. The highest transaction price of repurchase was 20.96 yuan/share, the lowest transaction price was 17.05 yuan/share, and the total transaction amount was 10,386,300 yuan (excluding transaction costs). This repurchase is in line with the established plan and relevant laws and regulations. The time, price and entrusted period of centralized bidding transactions of the repurchase are in compliance with the provisions. The company will continue to implement the repurchase plan in light of market conditions and fulfill its information disclosure obligations in a timely manner. "

  Xinzhoubang: Progress of Share Repurchase

  () "According to the announcement," the company held the 11th meeting of the 6th Board of Directors and the 11th meeting of the 6th Board of Supervisors on April 24, 2024, and the first extraordinary shareholders’ meeting in 2024 on May 14, 2024, at which the plan to buy back shares of the company was reviewed and approved. As of September 30, 2024, the number of shares repurchased by the company through the special securities repurchase account by centralized bidding transaction was 1,958,900 shares, accounting for 0.2598% of the total share capital as of that date, with the highest transaction price of 32.43 yuan/share and the lowest transaction price of 28.30 yuan/share, with the transaction amount of 60,418,800 yuan (excluding transaction costs). This repurchase is in line with the requirements of the company’s share repurchase plan and relevant laws and regulations, and the time, quantity and centralized bidding transaction entrustment of the company’s share repurchase are in line with relevant regulations. During the repurchase period, the company will choose the opportunity to implement the repurchase according to the market conditions, and fulfill its information disclosure obligations in a timely manner.

  ST Modern: Stock trading is seriously abnormal and there are many risks.

  () The announcement of change was issued, and the company’s stock deviated from -55.35% for 9 consecutive trading days and -71.34% for 23 consecutive trading days. Guangzhou Ruifeng Group Co., Ltd., the former controlling shareholder of the company, occupies the balance of funds of listed companies of RMB241,933,800. If it fails to collect the funds within six months as required, the Shenzhen Stock Exchange will take relevant measures, and there are still many situations in which other risk warnings are imposed on the company.

  Beinmei has bought back 4.36% of the shares and spent about 132 million yuan.

  () Announcement was issued. As of September 30, 2024, the company repurchased 47,093,900 shares of the company through the special securities account for share repurchase, accounting for 4.36% of the company’s total share capital. The highest transaction price was 3.90 yuan/share, the lowest transaction price was 234 yuan/share, and the total transaction amount was 132 million yuan.

  Huhua shares: Qin Yuezhong, the controlling shareholder, plans to reduce his shareholding by no more than 3%.

  () Announcement, Qin Yuezhong, the controlling shareholder and actual controller of the company, plans to reduce the company’s shares by centralized bidding and block trading within 3 months after 15 trading days from the date of announcement, accounting for 3.00% of the company’s total share capital. The reasons for the reduction are repayment of loans and equity pledge funds. Qin Yuezhong’s current shareholding ratio is 20.60%, and the reduction plan period is from October 30, 2024 to January 29, 2025. The reduction price will be determined according to the secondary market price and transaction method at the time of reduction.

  Lianchuang Electronics: Repurchase 7.56% equity of Lianyi Optics.

  () Announcement, the company signed an equity transfer agreement with Jiumu New Century, which will repurchase its 7.56% equity of Lianyi Optics. According to the agreement, the equity transfer amount is 207 million yuan, including the initial investment of 150 million yuan and the interest calculated at the annual interest rate of 8%. After the completion of this transaction, Jiumu New Century will no longer hold the equity of Lianyi Optics, and the shareholding ratio of the company will increase to 86.26%. The transaction conforms to the relevant agreements, and will not affect the company’s development strategy and business planning, and will not have a significant impact on its financial status and operating results. The company will continue to fulfill its information disclosure obligations.

  Huhua shares: Qin Yuezhong, the controlling shareholder and actual controller, intends to reduce the company’s shares by no more than 3%.

  On October 8, Huhua announced that Qin Yuezhong, the controlling shareholder and actual controller, plans to reduce the company’s shares by centralized bidding and block trading within three months after 15 trading days from the date of announcement (that is, not more than 3.00% of the company’s total share capital).

  Zhenghong Technology: In September, the sales of live pigs decreased by 57.92% year-on-year.

  () Announced that the company sold 9,000 pigs in September 2024, with a sales income of 12,379,300 yuan, a decrease of 12.76% from the previous month, a decrease of 34.42% from the previous month, a decrease of 57.92% and a decrease of 54.95% from the previous year.

  From January to September, the company sold a total of 60,300 live pigs, with a total sales income of 110,557,600 yuan, a year-on-year decrease of 65.70% and 58.88% respectively. The year-on-year decrease in pig sales from January to September was mainly due to the decrease in the company’s pig slaughter.

  Dio Home Furnishing: 250,000 shares of the company were repurchased as of September 30.

  () According to the announcement, as of September 30, 2024, the company repurchased 250,000 shares of the company for the first time through the special securities account for share repurchase, accounting for 0.0649% of the company’s current total share capital. The highest transaction price was 3.07 yuan/share, and the lowest transaction price was 3.01 yuan/share, with a total turnover of 761,000 yuan (excluding transaction costs). This repurchase conforms to the requirements of relevant laws and regulations and the company’s established repurchase plan. The time, quantity and price of shares repurchased by the company are in compliance with relevant regulations. In the future, the repurchase plan will continue to be implemented within the repurchase period according to market conditions, and the disclosure obligations will be fulfilled in a timely manner in strict accordance with relevant laws and regulations.

  Haowu shares: progress of share repurchase as of September 30, 2024

  () "According to the announcement, the company held the 14th meeting of the 9th Board of Directors on April 25th, 2024, reviewed and approved the plan of repurchasing the company’s shares, and agreed to use its own funds to buy back the shares in a centralized bidding transaction for subsequent equity incentives or employee stock ownership plans. The amount of repurchase funds is not less than 15 million yuan and not more than 30 million yuan, and the share price is not more than 5.20 yuan/share. The implementation period is 12 months from the date of deliberation and approval by the board of directors. By September 30, 2024, the company had repurchased 7,406,200 shares, accounting for 1.3903% of the total share capital, with the highest transaction price of 3.31 yuan/share and the lowest transaction price of 2.35 yuan/share, with a turnover of 20,400,300 yuan. This repurchase meets the relevant requirements, and will continue to be implemented and disclosed in a timely manner within the repurchase period according to market conditions. "

  Deep House A: Abnormal fluctuations in stock trading

  ShenShenfang A announced the change, and the deviation of the closing price of the company’s A shares (stock abbreviation: Shenfang A, stock code: 000029) for two consecutive trading days (September 30 and October 8) accumulated to 21.83%. In view of the abnormal fluctuation of stock trading, the company conducted verification, and found that there was no need to correct or supplement the information disclosed in the early stage. No major undisclosed information that may or has had a great impact on the company’s stock trading price was found in the public media recently. There have been no major changes in the company’s operating conditions and internal and external operating environment recently. There are no major events that should be disclosed but are not disclosed by the company, the controlling shareholder and the actual controller, or major events in the planning stage. During the abnormal fluctuation of stocks, the controlling shareholder and the actual controller did not buy or sell the company’s shares. The board of directors of the company confirmed that there are no matters that should be disclosed but not disclosed at present, and there is no information that should be disclosed that has a great impact on the company’s stock trading price. There is no need to correct or supplement the information disclosed in the previous period.

  Del future: It is planned to buy back the shares of the company from 30 million yuan to 60 million yuan.

  () On the evening of October 8th, it was announced that it planned to buy back the company’s shares from 30 million yuan to 60 million yuan at a price of no more than 5.95 yuan/share. The repurchased shares will be used to convert corporate bonds that can be converted into shares.

  Ligao Food: 1,813,777 shares have been repurchased.

  On the evening of October 8, () announced that from January 29, 2024 to September 30, 2024, the company repurchased 1,813,777 shares by centralized bidding through the special securities account, accounting for 1.07% of the company’s total share capital. The highest transaction price was 38.23 yuan/share, the lowest transaction price was 25.75 yuan/share, and the total transaction amount was 60,493,950.

  (): Stock trading fluctuated abnormally for three consecutive days, with the cumulative deviation of price increase and decrease reaching -21.32%.

  Siyuan electric announced the change. On September 29th, 30th and 8th, 2024, the deviation of closing price for three consecutive trading days reached -21.32%. In view of the abnormal fluctuation of stock trading, the board of directors of the company verified the relevant issues. The information disclosed in the early stage did not need to be corrected or supplemented. No major undisclosed information that had a great impact on the stock trading price was reported in the public media recently. The operating situation and internal and external operating environment did not change significantly. There were no major matters that should be disclosed but not disclosed by the company, its controlling shareholders and actual controllers, nor did the controlling shareholders and actual controllers buy and sell the company’s shares during the abnormal fluctuation of stocks, which caused serious stock trading. The board of directors of the company confirmed that there are no undisclosed matters that should be disclosed at present, and it has not been informed of relevant significant impact information. After self-examination, the company did not violate fair information disclosure.

  (): Stock trading fluctuated abnormally, with the cumulative deviation of the decline for three consecutive trading days reaching 26.71%.

  China Merchants Highway announced the change. On September 27th, 30th and 8th, 2024, the deviation of the closing price of the company’s stock for three consecutive trading days reached 26.71%, which was an abnormal fluctuation of the stock price. There is no need to correct or supplement the information disclosed by the company in the early stage, no undisclosed major information that has been reported by the public media recently and has a great impact on the stock price, no major changes have taken place in its operating situation and internal and external operating environment, and there are no major matters that should be disclosed and undisclosed by the company, controlling shareholders and actual controllers. During the period of abnormal stock fluctuations, the controlling shareholders and actual controllers did not buy or sell the company’s shares, and there was no violation of fair information disclosure provisions. The board of directors of the company confirmed that there are no matters that should be disclosed but not disclosed at present, and there is no information that has a great impact on the company’s stock trading price. There is no need to correct or supplement the information disclosed in the previous period. After self-examination, the company does not violate the fair disclosure of information, so investors are advised to invest rationally and pay attention to risks.

  Zhao Guowen, supervisor of Duoli Technology, intends to reduce his holdings by no more than 33,800 shares.

  () Announcement is issued, and Mr. Zhao Guowen, the supervisor, plans to reduce the company’s shares by centralized bidding within 3 months after 15 trading days from the date of disclosure of this announcement (accounting for 0.0142% of the company’s total share capital).

  Guangqi technology’s "36-month deep binding" battle plan was released, and the relevant selection work has been officially launched.

  On October 8, () announced that Tibet Yingbang Industrial Development Co., Ltd. (hereinafter referred to as "Tibet Yingbang"), the controlling shareholder of the company, intends to transfer its shares of the company by agreement to not less than about 216 million shares (accounting for 10% of the company’s total share capital) and introduce strategic investors (hereinafter referred to as "Zhantou").

  "The implementation of this agreement transfer will not lead to changes in the controlling shareholder and actual controller of the company, and will not have a significant impact on the corporate governance structure and going concern." Guangqi technology related people told the "Securities Daily" reporter.

  The voting right of the belligerent entrusts the actual controller to exercise it on his behalf.

  According to the announcement, Guangqi Technology plans to introduce two or three war ventures this time, and each war venture intends to transfer about 108 million shares, accounting for 5% of the company’s total share capital. The transfer price shall not be less than 90% of the closing price of the company’s secondary market on the trading day before the signing date of the Share Transfer Agreement. The bidder promises not to reduce the shares of the company transferred through this agreement within 36 months after the completion of the share transfer registration.

  It is worth noting that after becoming a shareholder of the company, the relevant potential strategic investors entrust Liu Ruopeng, the actual controller and chairman of Guangqi Technology, to exercise all the voting rights and voting rights of the company’s shares at the shareholders’ meeting.

  Liu Ruopeng, chairman of Guangqi Technology, said in an interview with Securities Daily: "The company tends to establish long-term and stable cooperative relations with investors through strategic cooperation, so we hope that partners can help the company in market development, adding R&D bases or increasing production capacity. The company hopes to achieve a win-win situation with strategic investors and share the benefits of the company’s future high-quality development. "

  It is reported that Guangqi Technology has been actively communicating with many potential strategic investors who meet the above conditions, and the relevant communication and negotiation work is progressing smoothly. At present, the relevant selection work has been officially started, and the competent department will review the potential strategic investors according to the selection principle and inform the company of the results as soon as possible.

  Previously, Guangqi Technology stated in the reply of the interactive platform that the strategic investors introduced by the company need to have relevant qualifications and backgrounds, and need patient capital and reliable capital that meet the national interests and support the company’s further development and growth as strategic investors. To ensure that the two sides jointly promote the landing of national strategic emerging technologies and lead industrial upgrading.

A Yangtze finless porpoise stranded in Nanchang, Jiangxi Province died. Expert: Anatomy and judgment: stress response of finless porpoise leads to death.

CCTV News:Recently, the death of a Yangtze finless porpoise stranded in the Ganjiang section of Nanchang, Jiangxi Province has attracted attention. Experts involved in the anatomy of the finless porpoise said that the initial judgment was that stress reaction led to death.

At about 2 pm on February 22, a citizen found a finless porpoise stranded on the beach at the riverside of the fishing village section of Yangzizhou Town, the northern branch of Ganjiang River in Nanchang, Jiangxi, and immediately called the police for help. Nanchang water police, fishery officials and experts from Jiangxi Fisheries Research Institute rushed to the scene at the first time.

Experts confirmed on the spot that the stranded finless porpoise was an adult Yangtze finless porpoise and had died. The finless porpoise was 144.6 cm long and weighed 43 kg, and no scars were found on its appearance. Subsequently, the dead finless porpoise was brought back to Jiangxi Institute of Fisheries Science for dissection.

Zhang Yanping, Director of Fishery Resources and Environmental Protection Research Office of Jiangxi Institute of Fishery Science:After anatomical observation and pathological analysis, it was found that there was no food in the stomach of finless porpoise, which might lead to stress reaction and sudden death. Other organs are normal, so it is judged that the death is caused by non-human factors.

The Yangtze finless porpoise is the only existing large cetacean in the Yangtze River. Because of its small population, it is also known as the "giant panda in the water". In the List of National Key Protected Wild Animals released in early February this year, the Yangtze finless porpoise was upgraded from a national second-class protected wild animal to a national first-class one.

Since the water levels of Xingzi Station and Duchang Station of Poyang Lake in Jiangxi Province fell below the 9-meter mark on December 8, 2020, Poyang Lake has been running for more than 70 days in the low-water period below 9 meters, which is the longest low-water period in five years. Affected by this, the water level of the Ganjiang River is reduced. According to experts, long-term low water level is easy to cause aquatic organisms to be trapped in beach ponds, which leads to difficulties in foraging.

Zhang Yanping, Director of Fishery Resources and Environmental Protection Research Office of Jiangxi Institute of Fishery Science:Finless porpoises are timid by nature, and may be stimulated by stress after meeting people. After we find the finless porpoise on the shore or river, we should be as careful as possible, including the passing of ships, which may cause stress stimulation, which is very unfavorable to the finless porpoise. Therefore, the public needs to raise their awareness of protection.

Biden identified the Armenian tragedy as "genocide". Where is the relationship between the United States and Turkey going?

  Recently, US President Biden identified the massacre of Armenians in the Ottoman Empire during World War I as "genocide". In this regard, the Turkish Foreign Ministry and several senior officials expressed strong condemnation, and the Turkish side even summoned the US ambassador to Turkey. Turkish President Erdogan said after a cabinet meeting in Ankara, the capital, on April 26th local time that "the President of the United States made unfounded, unfair and untrue comments about the tragedy that happened in our region more than a century ago", which was a "wrong step". It would undermine the relationship between the United States and Turkey, and I hope Biden would withdraw his remarks as soon as possible. He said, "If you say ‘ Genocide ’ Then you need to look in the mirror and evaluate it. I don’t even need to mention Native Americans, it’s obvious what happened. "

  So what impact will the "mutual choking" between the United States and Turkey have on the relations between the two countries? Will Turkey take tough countermeasures?

  Two newspapers and a late politician.

  On April 24, US President Biden issued a statement: "On this day every year, we commemorate all the people who died in the genocide against Armenians during the Ottoman Empire and are committed to preventing such atrocities from happening again."

  △ Screenshot of the statement issued by US President Biden (Source: White House website)

  On the second day of Biden’s statement, Turkish netizens forwarded photos of two Turkish newspapers published in 1975.

  One is the front page photo of the Turkish newspaper Freedom on July 26, 1975, with the headline: "We control the military base".

  The other is a front-page photo of Turkey’s "National Daily" on July 27, 1975. The headline reads: "The American flag in the base is lowered and the Turkish flag is raised."

  On July 25, 1975, in retaliation for the arms embargo imposed by the United States on Turkey, Turkey announced the closure of American military facilities in its territory. This is what these two front pages reported.

  Biden’s statement this time allowed the Turks to turn these two newspapers out of the dust of history. Some netizens commented: "Since we can do it before, why not now?"

  The word "ecevit" has also made a hot search in Turkey. Ecevit, a late Turkish politician, served as Turkish Prime Minister for four times. In 1978, the United States lifted the arms embargo on Turkey, but then Turkish Prime Minister ecevit resisted the pressure and did not reopen the US military base. Forty-three years later, Turkish netizens commented on ecevit: "He was a fearless prime minister" and "We commemorate the late ecevit with respect".

  △ Former Turkish Prime Minister Bülent Ecevit (data map)

  Through these two newspapers and ecevit, Turkish netizens expressed their anger at Biden’s statement. One netizen even said: "The first thing to do now is to close the US military base and recall our ambassador, and declare them persona non grata to expel them."

  Some Turks even went to the US Consulate in Istanbul to demonstrate and protest. They waved the Turkish flag and shouted the slogan "American soldiers, get out of Turkey".

  △ After Biden’s statement was released, some Turks demonstrated in front of the US Consulate in Istanbul. (Source: Associated Press)

  In addition to the repercussions aroused by the Turkish people, Turkish officials also responded to Biden’s statement at the first time.

  The Turkish Foreign Ministry issued a statement on April 24th, rejecting and condemning the statement of the President of the United States in the strongest way, saying that the statement had no academic and legal basis and no evidence to support it. Late that night, the Turkish Foreign Ministry summoned Satterfield, the American ambassador to Turkey, and told him that Biden’s statement was unacceptable. A number of senior Turkish political officials also expressed their views on social media platforms, refusing to accept and strongly condemning Biden’s statement.

  For a long time, Armenians have been pushing American officials to recognize the Armenian tragedy as "genocide". In 2019, the US Congress passed a resolution recognizing the Armenian tragedy as "genocide". However, previous American presidents always avoided using the word "genocide" to avoid angering NATO ally Turkey. However, Biden made a different choice and became the first American president to officially recognize the incident as "genocide."

  Analyst: Ignoring Biden’s words and returning to normal life is the best choice.

  Although senior Turkish officials strongly condemned Biden’s statement on April 24 at the first time, Turkish President Erdogan did not respond immediately, and he first expressed his opinion on April 26. Some of Erdogan’s words are fierce, but some media analysts believe that this fiercely worded response has essentially maintained restraint.

  Erdogan, while asking the US to correct its mistakes, also said that he and Biden will talk about this issue when they meet in June. He said that the two sides should put aside the issue of damaging bilateral relations and focus on the future. Erdogan did not announce any specific countermeasures.

  "Turkey will ignore Biden’s words and return to normal life. In my opinion, this is also the best choice for Turkey. " Hussein Baze, director of the Turkish Foreign Policy Institute, said. He believes that the United States has more sanctions than Turkey. What Turkey can do is to recall the ambassador and close the military base in Ingeer, but there will be no more measures against the United States. Turkey needs America more than America needs Turkey. Turkey is unlikely to take tough measures against the United States.

  △ Hussein Baze, Director of the Turkish Institute of Foreign Policy, was interviewed by the General Desk reporter.

  Selcuk Colakoglu, director of Turkey’s Asia-Pacific Research Center, said that Turkey’s economy is too fragile to bear the consequences of increasingly tense political relations with the United States. After Biden’s statement, the exchange rate of the Turkish lira against the US dollar plummeted on Monday (April 26), which was close to the historical low and once fell to 8.425. If the relationship between the United States and Turkey is tense again, or the devaluation of the lira is accelerated, it will make Turkey’s economy worse.

  △ Selcuk Colakoglu, Director of the Turkish Asia-Pacific Research Center, was interviewed by the General Desk reporter.

  Although Biden’s statement made Turkey dissatisfied, coping with the epidemic is the top priority for the Turkish government at present. Since March, the epidemic situation in Turkey has turned sharply, and the number of newly confirmed cases in Turkey once exceeded 60,000. On April 29th, more than 4.7 million cases were diagnosed in Turkey, ranking fifth in the world. In the face of the severe epidemic situation, Turkey began to implement an uninterrupted "grounded order" for nearly three weeks from April 29th. In the face of a serious epidemic, the priority of Biden’s statement has also dropped.

  US Secretary of State: Turkey is a key ally, but the United States also wants to express differences.

  On April 28th, US Secretary of State Blinken told foreign media that Biden’s statement was to pay tribute to the victims, not to blame them.

  On the relationship between the United States and Turkey, Blinken said that Turkey is a key ally of the United States and NATO, and the two countries have cooperated in many international and regional affairs. He said: "Like most countries, we have differences. In order to show respect to Turkey, we clearly, directly and honestly show our differences. "

  △ US Secretary of State Blinken (data map)

  In fact, a week ago, Biden and Erdogan expressed their willingness to continue cooperation and manage differences during the call. The statement of the Information Bureau of the Turkish Presidential Office stated that the leaders of Turkey and the United States agreed on the strategic characteristics of bilateral relations and the importance of deepening cooperation on mutually beneficial issues. The White House statement said that Biden expressed interest in establishing constructive bilateral relations by expanding cooperation areas and effectively managing differences during the call.

  Many media in Turkey carefully analyzed Biden’s statement and found that the United States avoided pointing the finger directly at Turkey. Biden did not directly mention Turkey in his statement, and the main body of atrocities against Armenians mentioned in the statement was the Ottoman Empire. At the same time, the statement said that Armenian intellectuals and group leaders were arrested in Constantinople, without mentioning Istanbul. Constantinople is the capital of the Ottoman Empire and the old name of Istanbul, the largest city in Turkey.

  Turkey’s geographical position is of great strategic significance to the United States. The Bosporus Strait and the Da Daniil Strait are the throat arteries to enter the Black Sea. The United States is not a country bordering the Black Sea. According to the Montreux Treaty signed in 1936, American warships need to notify Turkey in advance when they enter the Black Sea. Previously, in view of the tense situation in Ukraine, the United States had planned to send destroyers Roosevelt and Donald Cook to enter the Black Sea via the Bosphorus Strait in Turkey, and stayed until early May.

  △ American warships passing through the Bosphorus Strait, taken in October 2020. (Source: Reuters)

  In addition, Ingeer Lik Air Force Base in Adana province in southeastern Turkey also played an important role in the United States’ fight against extremist organizations. The Turkish army is also an important force of NATO Coalition forces in Afghanistan.

  △ The US military conducted a drill at Ingeer Lick Air Force Base (Source: official website, Lick Air Force Base, Ingeer)

  Analysts believe that Turkey and the United States are both NATO members with a long history of cooperation, and the relationship between the two countries is unlikely to fall apart. Although the two countries have differences on many issues, cooperation will continue.

  Producer Mu Muli

  Producer Fang Yiting Wang Wei

  Reporter Gu Yuting

  Editor Wang Tingting

2021 Volkswagen LaVida

The Volkswagen family adds new strength! 2021 LaVida gorgeous debut

Recently, the highly anticipated 2021 Volkswagen LaVida has been officially listed, bringing new choices to consumers. A total of seven carefully selected models, the market guidance price range is 112,900 yuan to 158,900 yuan, showing the cost performance and excellent quality of Volkswagen brands as always.

As an annual redesigned model, the 2021 LaVida maintains a perfect blend of classic and fashion in appearance and interior design. However, it is not just a simple iteration, but a new idea. The most striking thing is that the new model has been replaced with a brand-new Volkswagen logo, giving the body a stronger brand recognition. In terms of configuration, it has achieved remarkable improvement to meet the needs of modern consumers. The standard configuration includes 8-inch car intelligent entertainment interactive system, automatic parking, rear air conditioning air outlet, electronic handbrake and multi-function steering wheel, etc. The intelligent car coupling system, keyless entry and one-button start make driving more convenient. The top models are equipped with luxury configurations such as ACC adaptive cruise, keyless entry and one-button start, as well as practical equipment such as 17-inch wheels and dual-zone automatic air conditioning, creating a comfortable and technological driving experience for drivers.

Safety is the cornerstone of driving, and the 2021 LaVida has not been ignored. All models come standard with tire pressure detection system, MKB multiple anti-collision system and HHC ramp start assistance, etc., to protect travel. NBW emergency brake reminder reminds drivers to be vigilant and ensure driving safety.

In terms of power, the 2021 LaVida is equipped with 1.5-liter and 1.4T engines, with power of 83 kW and 110 kW respectively and torque of 145 Nm and 250 Nm respectively. They are matched with a 5-speed manual or 6-speed automatic manual transmission (1.5 liters) and a 7-speed dual-clutch transmission (1.4T) respectively, which can show abundant power performance no matter whether the city shuttles or gallops at high speed.

大众朗逸

In short, the 2021 Volkswagen LaVida has undoubtedly become the best choice for consumers to pursue comfort and practicality with its excellent performance, rich configuration and reasonable price. The launch of this new car has undoubtedly injected new vitality and expectation into the compact car market for Volkswagen.

Aouita 12 world premiere: the most sci-fi pure electric coupe at present?

On September 5th, 2023, Aouita 12 made its world premiere in Munich. It will also meet the public at the Munich International Auto Show held from September 5 th to September 10 th.

Aouita 12 is positioned as the "smart luxury coupe of the future". As the first coupe model of Aouita brand and a member of the double flagship, Aouita 12 shows a strong sense of design and sci-fi atmosphere both in appearance design and interior atmosphere.

Tan Benhong, Chairman and CEO of Aouita Technology, said:

"Aouita 12 will be delivered in the China market in the fourth quarter. At the same time, two other more competitive brand-new products will also be listed next year. As "design" and "technology" gradually become our two major value labels, we also plan to officially enter the international market next year. "

Nader Faghihzadeh, Chief Design Officer of Aouita Science and Technology, said:

"Aouita 12 externalizes the future aesthetic design on the whole vehicle design, which perfectly interprets Aouita’s forward-looking, extreme and pure design principles. It can inspire the endless possibilities and freedom in the hearts of users and lead users to see the future. "

Aouita 12 is operated by Aouita Global Design Center in Munich, Germany, adhering to the overall design concept of "Future Aesthetics" and adhering to the forward-looking, extreme and pure design philosophy.

Aouita 12 has a bright three-dimensional curved surface, with a high streamline profile, which makes the whole vehicle have super high design recognition.

At the same time, Aouita 12′ s creative car lamp design, in addition to the iconic E-shaped LED curvature headlight group, also created a HALO screen exclusively. This screen can interact with the owner and passengers when the user gets on the bus and other scenes, giving the vehicle emotion.

In terms of body size, the length of Aouita 12 exceeded 5 meters, reaching 5020 mm, surpassing the 4970 mm of Krypton 001 and the 4720 mm of the new Model 3. In addition, the wheelbase of Aouita has reached 3020 mm, which is almost the same as that of the domestic extended Audi A6L. This also makes Aouita 12′ s back seat space very considerable.

Aouita 12 pioneered the hatchback design without rear porthole, which we can also do on Polaris 4, which is famous for its design. On the one hand, the sliding back tailgate of this design improves the trunk space, on the other hand, it also makes the design of the tail more unique and chic.

In terms of interior design, the most striking thing about Aouita 12 is the integrated 35.4-inch 4K panoramic widescreen display across the entire instrument panel. On both sides of this screen are electronic rearview mirrors, which are very sci-fi and futuristic.

Most importantly, Aouita 12 is equipped with HarmonyOS 4.0 from Huawei, and will be in the first echelon in cockpit capability. Aouita 12 will also be equipped with Huawei’s advanced intelligent driving system ADS 2.0, which will reduce the dependence on high-precision maps and realize the experience of full scene coverage such as highway sections, urban sections and parking links.

In addition, the upper part of the door of Aouita 12 adopts 3D rib with parametric design, which continues to the partition at the rear of the cockpit, strengthening the unified style inside the cockpit and bringing the occupants a warm feeling of being surrounded.

Technology, elegance and simplicity are the interior design concepts of Aouita 12. The cockpit of Aouita 12 adopts the concept of Gentle Tech minimalist design, which reduces the number of physical buttons and only keeps the necessary buttons with high practicality.

In the use of materials, Aouita 12 also inherited the advantages of 11. A large number of atmosphere lights, NAPPA leather and solid wood make the cockpit atmosphere outstanding. The self-adaptive lifting wireless charging island and supporting cup holder also make the interior of Aouita 12 both functional and simple.

In terms of pioneering technology, Aouita 12, the world’s first car, has double zero-gravity seats in the front row, which can lie flat with one button and can be linked with situational mode. At the same time, Aouita 12 has also become the world’s first coupe with intelligent light-sensing front windshield, with adaptive light-sensing function.

Since Aouita 12 cancelled the traditional rear porthole, the rearview mirror of high-definition streaming media is essential. Aouita 12′ s streaming rearview mirror has the functions of anti-glare and heating defogging, which can enhance the night vision ability. With HDR anti-glare technology, the visual field content is clearer and more accurate, and the horizontal visual field is wider.

The advantages of Changan Automobile, Huawei and Contemporary Amperex Technology Co., Limited have created a CHN intelligent electric vehicle technology platform for Aouita, and Aouita 12 is the second product under this platform, which also represents this positioning technology and luxury brand to broaden its product line and provide consumers with more choices of pure electric luxury cars.

In the fourth quarter of this year, Aouita 12 will be delivered in the China market, while Aouita Science and Technology is accelerating the pace of new product research and development, and will launch two brand-new products next year. In addition, Aouita Science and Technology also plans to enter the international market next year, and use technology from China to expand the larger market.

This article is an exclusive manuscript of Observer. It cannot be reproduced without authorization.

All localities have stepped up efforts to support private investment and activate the "engine" of economic growth.

CCTV News:Private investment is the "engine" of economic growth. In the first half of this year, the growth rate and the proportion of private investment in the overall investment declined. In order to encourage and support private investment, in addition to the 17 policies and measures issued by the National Development and Reform Commission, various localities have also issued policies to increase support for private investment. Private investment in many fields has been increasing, and private investment confidence is gradually recovering.

Recently, various parts of China have issued relevant policies and measures to increase support for private investment, and all localities have actively explored new, practical and hard measures to promote the high-quality development of private investment. By creating a good business environment, broadening the track of high-quality investment and breaking down hidden investment barriers, private capital can be assured to invest well.

Shanghai has introduced 20 policies and measures to support private investment in major projects, reduce links, time and efficiency for private investment projects, reduce the cost of land for enterprises and implement preferential tax and fee policies.

Gu Jun, Deputy Secretary General of Shanghai Municipal Government and Director of Municipal Development and Reform Commission:Resolutely break down invisible barriers, further emphasize areas outside the negative list of national market access, support private enterprises to enter equally according to law, and carry out investment according to law. Encourage private capital to actively participate in 102 major projects planned by the state in the 14th Five-Year Plan and major projects planned by Shanghai in the 14th Five-Year Plan. Private enterprises participate in the design, construction, raw materials, facilities and equipment supply of major projects, and are treated equally in bidding.

In order to boost the confidence of private investment, Guangdong Province introduced four types of projects, including infrastructure, industry, scientific and technological innovation and social livelihood, with a total of 101 demonstration projects and 56 application scenarios, to attract private capital to participate.

Ye Zilin, Deputy General Manager of Guangzhou Daxin Cultural and Creative Development Co., Ltd.:With the government setting up a stage and enterprises singing opera, we can connect with the participating enterprises with relevant technologies on a higher platform, which can empower us more.

Since the beginning of this year, confidence in private investment has gradually recovered. 1— In May, the proportion of private investment in manufacturing investment reached 94.3%, and private investment in many fields continued to increase. In Wuhan, Hubei Province, the air-conditioning intelligent manufacturing base with a total investment of more than 3.4 billion yuan and an annual production capacity of 6 million sets was put into production at the end of March. The annual R&D investment of this enterprise for intelligent manufacturing accounts for nearly 5% of the total revenue.

Li Dongsheng, Chairman of TCL:Dare to invest in the future. In 2022, we added 68 billion yuan in investment, and this year we have planned another 36 billion yuan in investment.

Although the growth rate and the proportion of private investment in the overall investment have declined in the first half of this year, private investment has shown many bright spots in some areas. In the first half of this year, private investment except real estate development increased by 9.4% year-on-year, private investment in manufacturing increased by 8.4%, and private investment in infrastructure increased by 15.6%, showing strong investment confidence and investment motivation.

As the "engine" of China’s economic growth, private investment plays a key role in creating employment opportunities and enhancing economic vitality. With the implementation of national and local measures to support the development of private investment, the endogenous motivation of private investment will be effectively stimulated and private investment will achieve high-quality development.

A shares closed down: more than 4,000 stocks fell, and the turnover was less than 800 billion.

K diagram 000001_0

K figure 399001_0

K figure 399006_0

  The three major A-share indexes collectively pulled back today. As of the close, the Shanghai Composite Index fell 0.42% to close at 3,157.97 points. The Shenzhen Component Index fell 0.71% to close at 9681.66 points; The growth enterprise market index fell 0.77% to close at 1861.48 points. The turnover of Shanghai and Shenzhen stock markets was only 799.3 billion yuan, a decrease of 196.1 billion compared with the previous trading day.

  Most of the industry sectors closed down.The plate was among the top gainers.The plate was among the top losers.

  In terms of individual stocks,The number of falling stocks exceeded 4,000.Glass substrate concept stocks are active again,Daily limit Copper foil concept stocks rose sharply at the opening.Daily limit AI PC concept stocks fluctuated and rebounded.Daily limit Pork stocks rose in intraday trading,2 connecting plates. The stock changed in the afternoon,Daily limit,Up more than 5%. In terms of decline, gold and non-ferrous concept stocks were collectively adjusted.Wait for many stocks to fall more than 5%.

  The net outflow of northbound funds was 1.967 billion yuan.

  Northbound funds sold 1.967 billion yuan today, ending three consecutive days of net purchases; The turnover in the whole day was 103.558 billion yuan, accounting for 12.96% of the total turnover of A shares.The net sales were 215 million yuan, 195 million yuan and 117 million yuan respectively.The net purchase amount ranked first, amounting to 549 million yuan.

  Industry capital flow: 167 million net inflow

  In terms of industry funds, as of the close,,,The net inflow ranked first, including the net inflow of consumer electronics of 167 million.

  In terms of net outflow,And other net outflows ranked first, with a net outflow of 2.081 billion yuan.

  Today’s news

  National Development and Reform Commission: Expand the consumption of automobiles, home appliances, mobile phones and other goods and services such as cultural tourism.

  The National Development and Reform Commission held a press conference in May. The spokesman said that in promoting domestic consumption, the National Development and Reform Commission will speed up the implementation of the employment priority policy and do everything possible to stabilize employment, increase income and improve residents’ spending power. Accelerate the trade-in of consumer goods, expand the consumption of automobiles, home appliances, mobile phones and other commodities and services such as cultural tourism, and intensify efforts to cultivate new growth points such as creating new consumption scenarios and new formats.

  AI PC comprehensive "bright sword" domestic sales of 8688 yuan! Microsoft launches Copilot, fully integrated into Windows 11.

  A new Surface computer will be launched, following its Copilot+ standard to run.Model; These computers and other computers use arm-basedChip to provide a longerLife span, equipped with AMD andChip computers will also be available; The new function Recall helps to find what you have seen on your PC and provides real-time subtitles translated in more than 40 languages, including Chinese. The new Copilot+Surface Pro starts at $999 and starts at 8688 yuan in China.

  The first city of low-altitude economy is competing for speed-up: what are all localities fighting for? Who will stand out?

  Since the beginning of this year, more than ten provinces and cities, including Beijing, Nanjing, Anhui, Shenzhen, Suzhou, Shenyang, Taicang, Wuhan, Tianjin, Shandong, Changsha, Zhangzhou, etc.Relevant action plan or relevant draft for comments. Including Chongqing, Anhui, Jiangxi Gongqingcheng, Suzhou, Guangzhou, Wuhan, Guizhou and many other provinces and cities, have successively launched industrial funds to stimulate industrial development, of which the largest scale is 20 billion yuan.

  Repurchase+cancellation of 180 billion "milk Mao" is great! Top 20 buybacks released during the year.

  On the evening of May 20th,The 2023 Annual General Meeting of Shareholders was held, and the Proposal on the Scheme of Repurchase of the Company’s Shares by Centralized Bidding was reviewed and approved. The company intends to buy back shares by centralized bidding, and the amount of repurchase is not less than 1 billion yuan and not more than 2 billion yuan; The repurchase price does not exceed 41.88 yuan/share. All the repurchased shares will be cancelled according to law and the registered capital of the company will be reduced. After the cancellation of restricted stock repurchase, the registered capital of the company decreased from 6,366.09 million yuan to 6,365.96 million yuan. At the same time, 12 yuan will be distributed to all shareholders for every 10 shares (including tax), with a total cash dividend of 7.639 billion yuan, an increase of 1.018 billion yuan over the previous year, accounting for 73.25% of the company’s net profit in 2023. On the evening of May 20th, in addition to the announcement of share repurchase,Repurchase plans have been issued one after another, and the purpose of repurchase is almost to reduce the registered capital of the company.

  Four departments jointly issued a document! Deepen the development of smart cities and develop emerging digital industries according to local conditions.

  On May 20, the National Development and Reform Commission and other four departments issued "On DeepeningGuiding Opinions on Developing and Promoting Urban Digital Transformation, 13 specific measures are put forward from five aspects: promoting urban digital transformation in all fields, strengthening urban digital transformation support in all directions, and optimizing urban digital transformation ecology in the whole process. Judging from the overall requirements, the Guiding Opinions put forward that by 2027, the digital transformation of cities across the country has achieved remarkable results, forming a number of livable, resilient, and strong support for the construction of digital China. By 2030, there will be a comprehensive breakthrough in the digital transformation of cities across the country, and a number of Chinese-style modern cities with global competitiveness will emerge in the digital civilization era.

  Institutional point of view

  : look goodInvestment opportunities in the plate

  It is pointed out that compared with 2015, today’s real estate policy is different in objectives, means and impact on fundamentals. The real estate policy in 2024 is based on the background of great changes in the relationship between supply and demand of real estate, and it is based on the real demand for affordable housing, with more emphasis on the policy of the city. In addition, the policy attaches importance to avoiding the surge in supply while restoring the hematopoietic function of enterprises. Since this policy is driven by the real demand for commercial housing and affordable housing, and it is expected to be carried out on a large scale mainly in first-and second-tier cities with solid demand, it will take a long time to judge that the housing price has stopped falling and the possibility of an overall increase in core cities after it has stopped falling is very low. Generally speaking, at this stage, the business is more focused on the core cities, the financing channels are smooth, the product capabilities are strong, the local interaction ability is strong, and companies with some high-quality assets are more valuable for investment. Optimistic about investment opportunities in the sector.

  : continue to be optimistic about the sustained recovery trend of consumption in the second half of the year.

  It is pointed out that in April, the social security increased by 2.3% year-on-year, and the slowdown in growth rate was mainly due to the reduction of holiday days and the high base. The toughness of compulsory consumer goods is still strong, and the performance of optional consumer goods is differentiated. The post-cycle consumption of real estate in 2024M4 shows differentiation, and it is expected that the consumption of household appliances will further pick up after the policy is launched. Continue to be optimistic about the sustained recovery trend of consumption in the second half of the year, pay attention to the subsequent CPI and consumer confidence performance, and suggest paying attention to the leading consumer goods with brand, product, channel and management advantages.

  : give priority to stability, and accept it when it is good.

  The real estate purchasing and storage policy landed, and the down payment and interest rate reduction exceeded expectations, which was beneficial to just need. The bond market reacted calmly, and the stock market first responded to optimistic expectations. Recently, domestic production has been repaired, but domestic demand is generally weak. There are uncertainties in Sino-US relations in the election year of the United States, and the relationship between supply and demand in the A-share market has changed marginally recently. On the whole, we think that we can still be optimistic about A-shares strategically, but we should not be too radical tactically in the short term. We should focus on stability, and we can take the attitude of "taking what is good" in trading. Structurally, we will continue to pay attention to the improvement of export orders and the incremental effect of going to sea, such as, leading household appliances, etc. Pay attention to dividends, colors, etc. on dips.

  : Pay attention to the high ROE and high FCF faucet.

  Since the beginning of this year, the rotation speed of the industry and the main line has obviously accelerated, and the range of excess returns of the industry and the main line has obviously narrowed. It is related to the current lack of high prosperity direction, increased policy strength and efficiency, investor sentiment and risk preference, and the capital environment of stock game. However, there is a hidden line behind the rotation of the main line of the industry that the excess returns are steadily increasing. The high ROE and high FCF leader can become a stable and dominant style strategy under the background of stable economic profit, accelerated improvement of free cash flow of enterprises and intensified asset shortage.

24 Wuling Binguo are on the market for 56,800!

24 sincere 56,800

The 2024 model was officially launched on June 14th, and four models were launched, with the price range of 56,800-84,800 yuan. Here are some features of this car:

Appearance: It continues the design style of the old models. The front face is closed, the headlights are round, and it looks very cute with the compact body. Snow Mountain white paint is added to the 203km light-duty model. The body size is 3950mm×1708mm×1580mm, and the wheelbase is 2560mm. The new car also provides 15-inch wheels, compared with 185/60R15 in tyre size.

Interior: We will continue to use the dual-control screen consisting of a double-width steering wheel and a 10.25-inch LCD instrument+a 10.25-inch central control screen (only the 7-inch LCD instrument is equipped for middle and low models). The Linxi model is equipped with Ling OS Linxi car system, adding entertainment applications such as iQiyi. The 333km and 410km endurance models have added green color matching in the air.

Power system: equipped with front single motor, divided into high and low power. Among them, the 333km and 410km endurance models are upgraded with water-cooled flat wire motors, which have stronger heat dissipation capacity, the maximum power is still 50kw, and the maximum speed is increased from 120km/h to 130 km/h; The 203km endurance car is still equipped with a 30kw single motor with a maximum speed of 100 km/h. The new car comes standard with DC fast charging, and it takes only 35 minutes to charge 30%-80%. In terms of battery life, the battery packs with three capacities, namely 17.3kwh, 31.9kwh and 37.9kwh, are matched, corresponding to CLTC’s pure electric cruising range of 203 km, 333 km and 410 km.

Space: The wheelbase is at the leading level in the same class. Thanks to the high utilization rate of passenger compartment space, it can bring ample space experience to users. The trunk of the car is designed to be sunken, and the volume of the rear seat can reach 1240L after being put down as a whole, and 15 storage spaces are also designed in the car.

Configuration: It has the functions of remote car control and voice control by mobile phone app, and some models have electric adjustment of the main driver’s seat, keyless entry, electronic, cruise control, reversing radar, exterior rearview mirror with heating and defogging function, etc.

In addition, the new car also provides certain car rights, including 2000 yuan financial discount or replacement subsidy (one of the two choices); Give a 3.5kw charging pile (with installation conditions); The first non-operating vehicle owner has a lifetime warranty of Sandian (the whole vehicle is guaranteed for three years or 100,000 kilometers).

The actual car experience of some car owners is shared as follows:

A car owner said that Wuling Binguo was chosen mainly to facilitate the daughter-in-law to go to work and pick up the children, and its price was satisfactory, and the landing price was less than 90,000. The appearance of the vehicle is lovely and is liked by the daughter-in-law; The interior has a double screen and knob shift, which has a strong sense of science and technology, as well as a blue+black color scheme with a "small and fresh" style. In terms of space, a family of three is very spacious. People with a height of 178cm sit in the back row, and the leg space is close to a punch. The trunk can easily put down camping equipment such as awning, barbecue grill and folding chair. In terms of configuration, the remote car control function of the mobile app is practical, which can turn on the air conditioner in advance, and the voice car control can control navigation, music, etc., which is very convenient. Full of power, it is completely enough in urban roads, and it has a sense of pushing back, and the cost of electricity is extremely low, about 5 cents per kilometer.

Another car owner said that he bought a car for transportation. He thought that Wuling Binguo had a high face value and was more handsome after adding a black top, but it was a bit ostentatious to drive on the street. The car has a spacious space, large internal space, and can place all kinds of articles at will. It is not crowded when it is full, and the trunk is large, which has won praise from others. The vehicle is easy to drive, friendly to novice drivers, soft and comfortable to drive, small and available, and it is not difficult to drive and park. Configuration, there are voice car control, mobile app control and other functions, which can be unlocked by mobile phone Bluetooth, turn on the air conditioner in advance, and control navigation, charging and listening to music through voice, which is very easy to use.

Some car owners mentioned that Wuling Binguo is exquisite and retro, adding snow-capped white car color and empty green interior color matching, and there are more choices. Compared with, the appearance of Binguo is more popular with young female consumers, and it provides a two-color body; It has more advantages in space, longer wheelbase, more friendly rear space and larger trunk volume; Equipped with large-size Dalian screen, LingOS Linxi system is rich in entertainment applications. In terms of power, it provides a variety of endurance options, and the whole system comes standard with DC fast charging, which has high energy replenishment efficiency and good endurance achievement rate and energy consumption performance in endurance measurement. At the same time, 24 models of Binguo have upgraded the three-in-one water-cooled flat wire motor in the redesign, and the maximum speed has increased to 130 km/h. It also takes care of the user groups who need large space, long battery life and low car purchase cost, and provides a 203km version with fast charging as standard. On the whole, the design of 24 Binguo products has taken care of more consumers’ aesthetics. This time, the price reduction and allocation have been realized, and the comprehensive cost performance has been improved.

2023 Guangzhou Auto Show Exhibition Guide released! Heavy new car/exhibition schedule/traffic information …

Since its establishment in 2003, Guangzhou Auto Show has witnessed the vicissitudes of China’s automobile industry. With the liberalization of the domestic epidemic policy, everyone’s production and life will gradually return to the state before the epidemic. The 21st Guangzhou Auto Show in 2023 will be held in the Canton Fair Exhibition Hall from November 17th to 26th, in which the exhibition areas of auto parts and supplies, auto modification and new technologies will be extended from November 17th to 20th, 2023. This auto show is expected to have a total of 1,132 cars, including 59 first-time cars and 469 new energy vehicles in the world. As the final auto show in 2023, how can so many new cars not be overlooked? Don’t worry, Xiaobian has compiled a super-detailed exhibition guide for everyone, so that everyone can enjoy the Guangzhou Auto Show with confidence.

Exhibition date

The 21st Guangzhou Auto Show will be held in the Canton Fair Exhibition Hall from November 17, 2023 to November 26, 2023, including one media day, two professional public days and seven general public days, and the audience day will be open from 09: 00 to 17: 30 every day.

For detailed ticketing information and traffic information, this article is placed at the end of the article..

Pavilion information

The annual Guangzhou Auto Show has now reached its 21st year. This year, it will also be held in the China Import and Export Fair Exhibition Hall (hereinafter referred to as "Canton Fair Exhibition Hall"), from November 17th, 2023 (the 17th is Media Day) to November 26th, 2023. This year’s Guangzhou Auto Show will also be located on the second floor of Zone A, Zone C and Zone D of the Canton Fair, and the outdoor exhibition area of North and South Plaza will be used, with an exhibition scale of 220,000 square meters.

Zone a 1.1 hall

Toyota shiji (century SUV)

Toyota Century SUV, a highly anticipated model, will officially land in the domestic market at Guangzhou Auto Show, and it will be named "Shijie". As the Toyota version of Cullinan, Century SUV is not only the brand flagship, but also the leader in the luxury market. In Japan, a limited number of 30 sets are sold every month, and the starting price is as high as 25 million yen, which is about 1.24 million yuan, showing its dignity and rarity.

The vehicle design shows dignity and strength, the front is solid, the chrome-plated mesh is as tough as armor, and the center is inlaid with the century-old Phoenix logo, showing unparalleled dignity. Double-layer headlight design, four independent light groups are dazzling, just like the brightest stars in the night sky. The front enclosure is simplified, returning to the traditional shape, and the whole exudes a strong extravagance. The GR version is more sporty, and the embellishment of black components makes it more dynamic.

The color of the car body is rich and colorful, whether it is monochrome car paint or two-color car paint, or even flamboyant red, it can show the unique taste of the owner. The car body is huge, with the length, width and height of 5205/1990/1805mm and the wheelbase of 2950mm, and the thick D-pillar is exactly the same as Cullinan, showing a magnificent momentum.

Entering the car, the warm and comfortable design style makes people feel more cordial. Japanese simple color matching style, full LCD instrument and large-size central control display screen perfectly combine technology and luxury. Touch/physical buttons are readily available, with delicate leather coating and solid materials, all of which reflect the high-end quality of century SUV.

The rear door provides two ways to open the door: ordinary opening and sliding door. The seat is wide and thick, and the leg support is excellent. The second row of seats can realize the 77-degree adjustment of nearly lying flat, so that passengers can enjoy a comfortable journey. Each seat is equipped with an independent display screen and seat control screen, the central armrest is wide and comfortable, and the back row is also equipped with a dedicated small table board to provide passengers with all-round convenience and comfort. The window has a color-changing function, which provides private space for passengers. The trunk has a volume of 340L, meeting all kinds of travel needs. The new car also supports remote control function, which makes driving smarter and more convenient.

In terms of power, the Century SUV adopts a power system similar to the Lexus TX 550h+ plug-in hybrid model, equipped with a 3.5L V6 engine, with a comprehensive power of 412 HP (303 kW). The cruising range of pure electric vehicle is 69 kilometers, equipped with E-Four four-wheel drive system, and the comprehensive fuel consumption of WLTC is only 14.2L/100km. This outstanding dynamic performance not only highlights the powerful performance of century SUV, but also reflects Toyota’s technical strength in environmental protection and high efficiency.

Lexus GX

The new generation of Lexus GX will meet the domestic audience for the first time at the Guangzhou Auto Show, which has been officially launched in Austin, Texas, USA. As the third generation of GX cars, the new car and the new Land Cruiser are based on TNGA-F architecture, which will bring more outstanding off-road performance. The overall design of the new car has changed into a more tough and square style, and the interior and power have also been greatly upgraded. It is reported that the new car plan will be listed in overseas markets in early 2024, and will be introduced into the domestic market later.

The new generation GX has been repositioned as a "luxury hard-core off-road SUV", which has ushered in great changes in design. It is no longer highly similar to Toyota Prado, and its shape has injected a lot of tough and rough lines, which is quite tough for SUVs such as Toyota’s 4RUNNER in North America. Although the front face design is still a family-style spindle shape, it does not inject too many soft and delicate lines, but adopts blackening treatment, and the air inlet has a somewhat retro and square feeling. I believe it will be welcomed by hard-core SUV enthusiasts after listing.

The side of the car body follows the straight line, and it is almost impossible for you to find any large arc on the facade of GX. In terms of body size, the length, width and height of the new car are 4950/1980/1865mm and the wheelbase is 2850 mm. In approach angle, the pass-through angle and departure angle are 26/23/23 degrees, respectively, and the Overtrack version is 26/24/22 degrees. The taillights are designed through, and the rear windshield can be opened separately. At the same time, it is equipped with the trunk induction opening function, which is convenient for daily taking and carrying goods.

Lexus also launched the "Overtrail Project" program to provide users with more diversified outdoor lifestyles. Therefore, the new generation GX also launched the "Overttrail" version. This version of the car will have a series of exclusive design elements and functional configurations to cope with the more extreme driving environment.

The interior design of the new generation GX also fits the tough theme. Only the steering wheel design and the multi-function buttons on it can see the shadows of RX and NX in the same door. The towering center console is equipped with a 14-inch central control screen, which can support the interconnection of wireless Apple CarPlay and Android Auto phones. It is also equipped with a 12.3-inch LCD instrument, and it also supports the optional HUD head-up display function. In addition, we can also see the air conditioning knob with color LCD display that is common in Lexus new cars, and a large number of physical buttons are also reserved near the gear handle, which is convenient for users to operate quickly.

The new car can also provide a 6-seat or 7-seat layout, with ventilation and heating functions as standard in the front row and support for optional rear seat heating. The third row provides electric and manual seating configurations. Rear seat reminder has been implemented to improve safety and convenience.

In terms of power, the new generation GX offers a 3.5-liter V6 twin-turbo engine and a 2.4-liter inline four-cylinder turbocharged hybrid system. The 3.5-liter V6 version brings a maximum output of 354 horsepower and a peak torque of 649 N m. The transmission system is matched with the 8AT gearbox, and it is equipped with a full-time four-wheel drive system, a Tuosen central differential lock and an electronically controlled transfer case, and the traction can reach 8,000 pounds. The "Overtrail" model with stronger off-road performance also has the electronic dynamic suspension system E-KDSS pioneered by LEXUS, which improves the road driving quality while taking into account off-road strength, advanced braking control technology (including all-terrain selection system and crawling control system) and all-terrain monitoring system to help vehicles easily cope with various driving environments.

Defender V8 DEFENDER

Some time ago, Land Rover has announced the lineup of Guangzhou Auto Show, which will display the brand-new Defender V8 DEFENDER, the 2024 Range Rover and Range Rover Sport Edition, and the Discovery Family and Jaguar brand models.

The Land Rover DEFENDER series will launch the new V8 models of DEFENDER 90, 110 and 130, equipped with a 4.4T V8 engine, with red V8 and Defender logo on the exterior details.

The 2024 Range Rover and Range Rover Sport Edition will also be listed at the auto show. The new Range Rover will upgrade its configuration and power system, and the Range Rover Sport Edition will also be adjusted. The price will be announced at the auto show.

Zone a 1.2 hall

Brand-new domestic Prado

Since the domestic Toyota Prado stopped production and sales in 2020, it has become a regret in the hearts of many off-road enthusiasts. Until August this year, this regret was made up, because the new Toyota Prado was released, which not only changed its brand-new platform, brand-new design and brand-new power system, but also was introduced to China by FAW Toyota, and it is expected to be listed in June 2024.

Prior to this, the new Toyota Prado is expected to be officially unveiled at the Guangzhou Auto Show. At the 2023 Tokyo Auto Show, which opened last week, the new Prado ushered in its debut and became one of the most eye-catching models at the auto show.

According to the previous big coffee in the industry, the brand-new domestic Pula will provide three models of China Net according to different configurations, including the retro round lamp model (low matching), rectangular lamp model (middle matching) and a special version of the model, instead of using the "TOYOTA" letter LOGO, it will use the Toyota tauren logo (super matching exclusive).

And said that the domestic version of Prado will provide four colors to choose from, namely white, silver, black and bronze. As for the price, the big coffee guess is 400,000-600,000 yuan, while the price of the new Prado exposed online a few days ago is 450,000-550,000 yuan. For reference, the price of 2019 domestic Prado is 49.48-50.48 million yuan.

In addition, it is worth mentioning that the brand-new Prado, which was unveiled at the Tokyo Auto Show, is equipped with a brand-new Toyota half-width steering wheel with a steer-by-wire system, which can turn 60 degrees at most from left to right. At the same time, the steering wheel also integrates the throttle and brake control. The field personnel demonstrated a concept that the throttle and brake can be controlled only by the steering wheel, without the throttle brake pedal at all, and then the throttle is the handle pressed by the right thumb (like a scooter), and the brake is the brake handle behind the steering wheel like a bicycle.

In terms of body size, the length, width and height of the new Prado are 4925/1980/1870mm and the wheelbase is 2850mm;; In cross-country parameters, the ground clearance is 221mm, and the approach angle, departure angle and passing angle are 31 degrees, 22 degrees and 25 degrees respectively.

In terms of power, it is understood that the new Prado will be equipped with a hybrid system consisting of a 2.4T four-cylinder engine and an electric motor in the China market, in which the maximum power of the engine is 330 HP, and the comprehensive torque of the system is 630 Nm. In addition, the electric motor can provide additional power of 49 HP. In terms of transmission system, it is matched with an 8-speed automatic manual transmission, and equipped with off-road functions such as full-time four-wheel drive, transfer case and central differential lock.

Crown Sedan

In addition to the new Prado is expected to debut at the Guangzhou Auto Show, Toyota also has a heavy model debut-Crown brand-new sedan. At present, FAW Toyota has officially announced the preview of the car, and its appearance at the Guangzhou Auto Show is already certain. It is worth noting that at last week’s Tokyo Auto Show, the Crown Sedan model debuted, and the new car was positioned as a medium-sized sedan coupe, which is expected to be consistent with the model unveiled at the Guangzhou Auto Show.

From the appearance, the new car adopts a brand-new design language. The front face is equipped with a large vertical grille net and a penetrating LED daytime running light. The side face adopts a slip-back shape with multi-spoke blackened wheels, which is quite sporty. However, the new car does not adopt the popular hidden door handle design, and the rear of the car adopts the through taillight design, but the tailgate is not hatchback.

In terms of body size, Crown Sedan has a length, width and height of 5030/1890/1470mm and a wheelbase of 3000mm, which is much larger than that of Toyota Asian Dragon and lexus ES.

The picture shows the interior of Toyota Crown SportCross.

In terms of interior, the new car continues the layout design of Toyota Crown SportCross, equipped with dual 12.3-inch integrated large screen, three-spoke multi-function steering wheel and mechanical gear shifting. At the same time, more physical buttons are reserved in the car, which is a good balance between technology and practicality. At the same time, the interior materials use a lot of solid wood and leather to create a luxurious interior atmosphere.

In terms of power, the new car will have a hybrid version and a hydrogen fuel cell version, but the specific power parameters are still unclear. For reference, Crown SportCross offers 2.5L hybrid system and 2.4T hybrid system in the domestic market. Among them, the maximum power of 2.5L engine is 185 horsepower, the maximum power of motor is 120 horsepower, and the official acceleration time of 100 kilometers is 8.3 seconds. The transmission system matches the E-CVT continuously variable gearbox.

The maximum power of the 2.4T engine is 269 horsepower, the maximum power of the motor is 163 horsepower, and the official acceleration time of 100 kilometers is 5.8 seconds. The transmission system is matched with a 6-speed automatic manual transmission.

In terms of price, also for reference, the price range of Crown SportCross in the domestic market is 36.90-42.90 million yuan.

Mazda CX-50 line is also a mixed version.

As the Guangzhou Auto Show is about to kick off, our front team successfully photographed the hybrid version of Mazda CX-50 around the exhibition hall, which will be officially listed at the Guangzhou Auto Show from now on. Previously, the new car was mass-produced on November 3. The biggest highlight of the car is based on the newly developed hybrid platform of Changan Mazda, which is equipped with a hybrid system consisting of a 2.5L naturally aspirated engine and a motor.

Of course, we are also familiar with this hybrid system, that is, the one on Toyota, in which the engine comes from GAC Toyota, with a maximum power of 178 HP, and the motor power is unknown. For reference, the maximum power of the motor on the hybrid version of Toyota Willanda is 120 HP, the comprehensive power of the system is 218 HP, and the comprehensive fuel consumption of WLTC is 5.1L/100km.

As for the appearance, the new car continues the design of the fuel version as a whole, mainly by adding a mixed logo at the front fender to enhance the recognition. In terms of body size, its length, width and height are 4785mm/1920mm/1670mm, and its wheelbase is 2815 mm. Except for the height increase of 32mm, the other data are the same as those of the fuel version.

In terms of price, the price range of the current fuel version model is 15.98-206,800 yuan, which is 14,000 yuan lower than the threshold of Toyota Velanda at the same level, while the starting price of the hybrid version model of Velanda is 223,800 yuan. If the pricing strategy of the fuel version model is followed, then the price of Mazda CX-50 line also starts from 210,000 yuan.

Zone a 2.1 hall

Volvo EM90

On November 12, Volvo’s first pure electric MPV model was officially launched, and a new car was launched, with an official guide price of 818,000 yuan, and the new car was positioned as a medium and large MPV.

Volvo EM90 is the first pure electric MPV model under the Volvo brand, which adopts Scandinavian design style in design, showing low-key luxury and restrained atmosphere.

In terms of design, Volvo still continues the family-style design language, and the headlights of Raytheon’s hammer on the front face are still preserved. And it incorporates more scientific and technological elements. For example, when it is lit, the headlights light up slowly. In addition, there is also a ceremonial "boot animation" on the Logo of the front air intake grille. The appearance can be selected from four colors: gilded gold sand, sea gray, crystal white and agate black, which can meet the individual needs of different consumer groups.

The vehicle size is 5206/2024/1859mm, and the wheelbase is 3205 mm. It is positioned as a medium and large MPV. The side design is quite atmospheric, and the layering is very rich, which will not make you feel that the design is too monotonous, and will not lose the sense of volume that a medium and large MPV should have.

The tail design continues the classic design elements of Volvo brand, but the line-type light group has been changed to the point-breaking light group, but the taillight style of Raytheon Hammer is still retained.

In terms of interior, Scandinavian design is mainly about simplicity, function and nature. First of all, simplicity, in fact, the real car design of EM90 highly restores the design of previous concept models, including the layout of the screen and the layout of the overall interior functional area and even the direction of lines.

As for nature, it is reflected in the materials used in the interior. The wood used in the door panels and the center console comes from extremely cold areas. Although the number grows slowly, the wood density is high, the texture is not easy to deform, and it is in the door.

The board is also decorated with luminous wood, and the unique "VOLVO Morse Code" eggs are integrated into the wood grain. Another point is on the handle. EM90 adopts Orrisch crystal handle, which is not only a special crystal brand for Swedish royal family and Nobel Prize-winning dinner, but also has excellent workmanship and hand feel.

In the second row, there are two high-standard aviation seats, which not only support ventilation, heating and massage, but also support leg rest adjustment. In addition, you can also control the entire window in the second row and control the air conditioning temperature through the touch screen on the door panel.

An entertainment screen is also placed on the roof of the car in the back row, which needs to be controlled by the remote control, but the functions are still very rich. In addition to meeting the daily entertainment needs, it can also adjust every function of the air conditioner and complete the switching of various modes.

In terms of power, the new car adopts a single motor with a maximum power of 200 kW and is equipped with a 116-degree battery. In terms of battery life, the official CLTC cruising range has reached 738 km. In addition, the new car also provides a two-way charging function, which can be transformed into a convenient "mobile power station" at any time, and can charge other electric vehicles (up to 6.6kW) and electrical appliances (up to 3.3kW).

Cadillac OPTIQ

Cadillac OPTIQ positioning pure electric SUV, will also officially meet with you at the Guangzhou Auto Show. The new car has adopted a brand-new design. As Cadillac’s second Otneng model for the China market, OPTIQ is expected to be unveiled this year.

In terms of appearance, Cadillac OPTIQ adopts a brand-new design language. The headlight group presents a 7-shape, and the upper chrome-plated decorative strip connects the left and right headlights. Although it is an electric car, the new car still retains the net decoration.

In terms of body size, the length, width and height of the new car are 4822/1912/1642mm(1644mm) and the wheelbase is 2954 mm. Although it is smaller than LYRIQ Sharp Song, it is expected that the price will be cheaper.

There are two vertical taillights at the rear of the vehicle, and the segmented design is adopted, showing a unique personality. The whole body has a wider visual experience.

In terms of power, the motor power of the new car is 150 kW and 180 kW respectively, and the maximum speed is 180 km/h. We will continue to pay attention to more information about this model.

Dazhong ID.3

The mid-term redesigned ID.3 will also meet the audience in China at this Guangzhou Auto Show, and the official map of the new car has already been released. The new car maintains its original overall style, and has been upgraded for its internal and external design, which will improve its performance in all aspects, such as battery life and car engine, and at the same time enhance the cruising range of its various models. The new car is expected to be delivered to European buyers in the fourth quarter of 2023 at the earliest, and the domestic version will also be updated.

In fact, the overall visual change of the new ID.3 is not too big. The appearance is mainly improved by the newly designed dot-matrix light source inside the headlight. The front of the car follows the previous through-light strip configuration, and the bumper shape is more concise. The lattice pattern of C-pillar is cancelled in the new model, and the taillights are added with a brand-new matrix light group, which also contains a changeable X-light shape to increase its charm, while retaining the low wind resistance wheel group.

The interior follows the layout of the old models, but it adds a little freshness to the materials, color matching and metal trims. Originally, some hard plastics were paved with pure leather (non-animal materials). In addition, Volkswagen also said that the equipment level of the new car will be significantly improved. In addition to having a better charging experience, it also comes standard with a 5.3-inch floating instrument and a 12-inch central control panel, and the car has also been updated.

In addition, more practical designs will be introduced into the car. For example, the position under the central control has been redesigned to accommodate two groups of cup holders, and the common detachable floor will be added to the trunk, greatly improving the convenience of daily use. The driver’s assistance system is also fully functional, and the Travel Assist with Swarm Data and memory automatic parking function are optional.

It is worth noting that Volkswagen also provides more handsome integrated seats for the new ID.3, which are also made of environmentally friendly materials, and there are also panoramic skylights that can increase the visibility of the car room.

The power of the new ID.3 has not changed. The maximum power of the motor is 201 HP (150 kW), the maximum torque is 310 Nm, and the battery capacity is 58kWh and 77kWh. It is slightly different from the current domestic ID.3 (the domestic version is 125 kW motor +52.8/57.3kwh battery pack), and the cruising range is 426km and 546km for 30 minutes. The new ID.3 comes standard with the Plug & Charge convenient charging system. When it is connected to the charging pile, the vehicle will be automatically authenticated and start charging. At the same time, the system can also monitor the occupied charging stations and exclude them from the suggested stations.

The new car will also be equipped with a new generation of driver assistance systems, including full-speed adaptive cruise system (ACC) and lane keeping system. You can also choose the Travel Assist full-speed driving assistance system that supports group data. When the group data is available, the Travel Assist full-speed driving assistance system can keep the vehicle in the right lane only by one recognizable lane line, even if the vehicle is driving on a country road.

It is worth mentioning that Volkswagen is also expected to launch a GTX high-performance version of dual-motor four-wheel drive for ID.3, and the maximum horsepower is expected to exceed 272hp, and it will be more fierce and sporty for the exterior kit and interior design.

Volkswagen ID.BUZZ

Volkswagen ID.BUZZ will once again meet a domestic audience. Although it is not the first time to appear, it will be introduced into China as a legendary model, and it is worth sharing with you again. According to the plan, the new car will provide a 5-seat version in the early stage and a 6-seat version in the later stage. For reference, at present, Volkswagen ID.BUZZ has been listed in the European market, and the price of ID.Buzz Cargo is 54,430.6 euros, which is about 385,000 yuan. The price of ID.Buzz Pro is 64,581.3 euros, about 456,000 yuan. The new car will be officially introduced by SAIC Volkswagen, and countless fans are excited about it.

The appearance of the new car continues the design elements of Volkswagen T-series models. The large-size logo and two-color body design are all in tribute to the classic shape of Volkswagen. In the front part, the new car is still the same as the ID series models, with penetrating light strips and matrix headlights, plus a large number of hollowing-out treatments around the front, which has a strong sense of design.

On the side of the car body, the huge triangular window on the A-pillar of the new car is more conspicuous, and the size of the side window is gradually reduced from the front row to the back, so the overall shape is more unique. In terms of body size, the length, width and height of the new car are 4712mm/1985mm/1937mm respectively, and the wheelbase is 2988mm.

The shape of the rear part also sees the shadow of the ID. Family, and the through-going light belt with the square tail shape can satisfy the passenger space in the car as much as possible. There is also a huge Volkswagen LOGO at the tail, and there is also the logo of ID. Buzz, which is highly recognizable.

Walking into the car, the new car is still in the interior style of Volkswagen ID. The suspended LCD instrument is matched with the 12-inch central control panel, and the through air conditioning outlet, plus the decoration of wood grain panel, the overall exquisiteness is greatly improved, and it also adopts two-color color matching. It is reported that the vehicle will be equipped with up to 8 USB interfaces to meet the charging and use needs of passengers for mobile devices. Among them, three USB-C interfaces are standard configuration, two have data transmission function, and the third one is located on the passenger door. Through optional installation, there will be three additional interfaces on the center rearview mirror and the sliding doors on the left and right sides.

A foldable small table is also provided on the backrest of the front seat of the new car, and two charging interfaces will be provided in the third seat/trunk position. Depending on the equipment, the maximum charging power is 45 watts, which is three times that of the previous configuration. In addition, in addition to the electric sliding doors on both sides, the tailgate is also electric. Because there are only two rows of seats in the five-seat model, there is a huge storage space in the back row. The capacity of the luggage compartment of MPV model is 1121 liters, which can be expanded to 2205 liters in the case of the second discharge.

In terms of power, the new car is equipped with a power battery pack of 77kWh (with a total capacity of 82kWh). The maximum power of the motor is 150kW, the peak torque is 310N·m, and the maximum speed is 145 km/h. The DC fast charging power can reach 170 kW, and it takes about 30 minutes to charge 5%-80%, and the cruising range of WLTP is 423km. At the same time, the vehicle is equipped with advanced software system, driver assistance system and two-way charging function. For more information about the new car, we will continue to pay attention to the report.

Zone a 2.2 hall

GAC Toyota Camry

On November 14th, the brand-new ninth-generation Camry made its official debut in North America. It is worth mentioning that at this Guangzhou Auto Show, the new car will also be unveiled at the Guangzhou Automobile Toyota booth. The pace of domestic replacement and overseas replacement is so close that the ninth-generation Camry has become a highlight of the Guangzhou Auto Show. Before that, we can take a look at the North American models.

Judging from the press conference, it is obvious that the ninth-generation Camry still adopts double appearance design to further distinguish the preferences of different consumers. The overall line outline of the appearance has not changed much, especially from the front side, the shape of the waistline and the smooth outline of the car body all show the feeling of the eight generations of Camry. The two-color body design has also been retained, and the new car will also provide 19-inch wheels to make the whole body more dynamic. The specific size of the car body is still unknown, but it is estimated that there will be no obvious change.

The change of design concept is mainly reflected in the front face and tail. In the front face, the vertical sign changed into a horizontal sign, and the front edge of the engine compartment retreated, creating a visual effect that the front part of the car sank, and there was a feeling of being ready to go. In addition, the light group is changed to C-shaped headlights, the grille shape of the front bumper is similar to the honeycomb style design, and more moving edge details are added on both sides of the bumper. The design of the tail is more concise, and it is also a C-shaped taillight, which echoes the headlights.

The new car is built on the TNGA-K platform, and the overall temperament is still familiar. In addition, the new car should launch four models, namely LE/SE/XLE/XSE.

Judging from the interior of the models released in North America, it still has a strong sense of machinery, especially the lines at the air outlet of the instrument panel, which makes the interior more tough and unconventional.

It is understood that the middle and high-end models of the new car will be equipped with a 12.3-inch central control large screen, supporting wireless CarPlay and Android Auto, as well as wireless charging function. The head-up display and JBL sound system will not be absent. In terms of safety configuration, the new car comes standard with TSS3.0 Zhixing safety suit.

In terms of power, the ninth-generation Camry unveiled in North America has achieved a comprehensive hybrid, and there will be no more fuel models, mainly featuring a 2.5L hybrid version and providing a two-drive/four-drive version. The four-wheel drive model adds a driving motor to the two-wheel drive model, with a maximum power of 173kW, while the two-wheel drive model has a maximum power of 168kW.

Honda e:NP2

At this Guangzhou Auto Show, the production version of Honda e:NP2 will meet the audience soon. Previously, at the 2023 Shanghai Auto Show, Honda China officially released the second model of its e:N brand, the e:NP2 Prototype concept car, which was developed by Honda’s China team, and came from the intelligent and efficient pure electric architecture "e:N Architecture F" exclusive to pure electric vehicles. It is still a positioning SUV model.

The exterior design was developed by Honda’s China headquarters team. This exterior is described in Honda’s own words: adopting the forward-looking design concept of e:N Design, and adding sharp modeling and sharp moving lines that break through the boundaries between reality and the future. The side of the car body adopts a slip-back design with a large inclination angle, which reflects a more dynamic modeling style and also reflects that the positioning of this car will also be biased towards your young and sporty orientation.

In terms of the tail, this car also adopts a very sci-fi design style. The through taillights are "unfolded" on the left and right sides to form a C-shaped style. With the raised rear wheel eyebrows, it enhances the sense of science and technology and also enhances the muscle of the vehicle.

At the press conference, Honda China announced that it has fully entered the era of electrification. After 2027, all models launched by Honda in China are hybrid vehicles and pure electric vehicles, and no new pure fuel vehicles will be launched; By 2035, Honda China will achieve 100% sales of pure electric vehicles.

At the same time, the concept car "e:N SUV Preface" of Honda’s E: N brand third bullet electric vehicle, which Honda China plans to launch in 2024, is the world premiere. In addition, the product matrix of Honda e:N brand will be further enriched and expanded. This auto show also brought the fourth bomb model e:N GT Concept, and the research and development of the production car built on this basis is also progressing smoothly. Like the third bomb, the fourth bomb model will also adopt the brand-new exclusive architecture "e:N Architecture W" for pure electric vehicles, and it is planned to be launched after 2025.

Chuanqi E8

We learned from official sources that GAC Chuanqi will announce the pre-sale price and start the pre-sale at the Guangzhou Auto Show, which will open on November 17, and tentatively start delivery to users in early December. GAC Chuanqi E8 has a length of 4.9 meters and its own plug-in hybrid, which is very attractive to users with convenient charging conditions.

In terms of appearance, Chuanqi E8 shows an avant-garde and fashionable atmosphere under the blessing of the design style of the front face of the "Guardian City". For example, the interior of the trapezoidal mesh is spread out in a staggered arrangement in the form of stepped decorative strips, and at the same time, silver chrome-plated decorative strips are given as a bedding. In addition, the split headlight is composed of an upper penetrating lamp group and a lower fangs headlight, and the Logo can be lit together.

The length, width and height of the new car are 4920/1900/1760mm and the wheelbase is 2930mm respectively. The modest size can meet the parking space of most home users. The body design of van MPV is adopted as a whole, and the design of 270 three-side connected windows can enhance passengers’ sense of vision. In addition, the blade-type multi-spoke hub has a good visual impact.

The tail design is simple, and the penetrating LED is the visual center of the whole car, extending from the D-pillar to the middle Logo of the tail. At the same time, like the front of the car, this part of the area can shine together.

In the interior, the vehicle uses a lot of straight center console lines and embedded narrow strip LCD instrument+large-size floating central control panel, which adds a little more sense of technology. It adopts black+brown double-color design, and chrome-plated elements are added in many places for embellishment, which is combined with leather materials covered in many places to enhance the advanced feeling of the vehicle.

Chuanqi E8 is equipped with the electronic and electrical architecture of Guangzhou Automobile Spirit, which was first applied by Chuanqi and upgraded in all directions. Compared with traditional vehicles, the computing power is increased by 50 times and the data transmission speed is increased by 10 times. In terms of intelligent cockpit, Chuanqi E8 is equipped with Qualcomm Snapdragon 8155 chip, 14.6-inch central control large screen and 8-inch instrument, and the latest ADiGO 5.0 is built in.

The car adopts 2+2+3 seat layout, in which the second row of executive seats has the functions of electric leg rest, heating and ventilation. The most important thing is to support the "one-button zero-gravity mode", which can make the second row of passengers get the most comfortable ride experience.

For an MPV of the size of Chuanqi E8, the performance of its interior space is not bad, and it claims to be an MPV model with a usable plane area of 5.20 square meters. In addition, through some settings of the seats in the car, several playing modes can be created. And the third row of seats can be completely stored under the negative floor, forming an oversized storage space.

Chuanqi E8 uses its own plug-in hybrid, which is composed of 2.0L engine and drive motor. The maximum power and torque of the 2.0L engine are 103kW and 180N·m respectively. The driving motor has a maximum power of 134kW and a maximum torque of 300N·m, which is matched with a two-speed DHT transmission. The official claim is that the acceleration time of 100 kilometers is 8.8s s. It has three driving modes: economy, comfort and sports. Equipped with a ternary lithium battery with a capacity of 25.57kWh, CLTC has a pure electric cruising range of 150km, a power consumption of 18kWh/100km per 100 km, a comprehensive cruising range of 1200km with full oil and electricity, and a comprehensive fuel consumption of 1.13L/100km. In addition, the energy mode will be consistent with Chuanqi E9, with pure electricity, intelligent hybrid and power conservation as priorities, and the energy recovery intensity can be adjusted.

Zone a 3.1 hall

Domestic Ford Ranger

At the upcoming Guangzhou Auto Show, Jiangling Ford Ranger will be officially listed. The new car was officially put into pre-sale at the Chengdu Auto Show in 2023, with a pre-sale price of 269,800 yuan and a limited number of 800 cars, and the starting price of the whole car system will not exceed 160,000 yuan. In addition, the first model Ford Ranger 1st Edition will also bring a very rich original factory off-road modification and exclusive design style.

In terms of appearance, Ford Ranger’s design is quite fashionable and domineering, the grille area is very large, and there are transverse spokes with penetrating design inside the grille. This design is also similar to the F-150 Limited version, and the C-shaped headlights on both sides have become the finishing touch of the whole front face design.

In addition, the first edition model of Ford Ranger 1st Edition was originally equipped with front and rear steel bumpers and chassis armor. At the same time, in order to improve the wading depth, the new car adopted a unique design with the wading throat air inlet backward.

In the interior design, Ford Ranger also continues the most advanced design style of Ford, and has a good performance in terms of materials and materials. In addition, it also has some small ideas. For example, in addition to the traditional glove box, the center console also provides a storage box at the upper part, and there is also a retractable cup holder.

The central control center is a 12.8-inch vertical central control screen, equipped with the latest SYNC 4 infotainment system, which not only supports common mobile phone screen projection functions, but also has many localized apps and can realize voice control. In addition, in terms of off-road configuration, the new car also has tank U-turn, steep slope descent, front axle differential lock, rear axle differential lock and so on.

In terms of power, the new car will provide a 2.3T turbocharged gasoline engine and a 2.3T turbocharged diesel engine, which is matched with an 8AT gearbox.

Hongqi EH7

Hongqi EH7, namely Hongqi E001, which debuted at Shanghai Auto Show, is the first new energy car with Hongqi FMSs platform architecture. The car is nearly 5 meters long and adopts a hybrid form of pure electric and plug-in. It is expected to be officially listed at the Guangzhou Auto Show.

The appearance is simple and atmospheric, and the front of the car is designed without the net, and the mixed version is inserted or retained. The front headlights are 7-shaped, full of light language function, the lower grille is smiling, and the central axis highlights the brand characteristics. The body size is 4980/1915/1490mm, and the wheelbase is 3000 mm. It pursues maximum seating space, short front and rear suspension, long wheelbase, and large inclination angle of the tail window, with coupe style. The A-pillar is equipped with a face recognition camera, the tail light is dazzling, the internal structure is complex, and the lighting effect is good at night.

The interior is equipped with 6+15.5-inch curved dual screen, AR HUD head-up display system and Snapdragon 8155 chip, which highlights the bold attempt of science and technology. The steering wheel is personalized, like a gamepad. There is a large air conditioning outlet at the bottom of the screen. Seat integrated design, strong comfort, bold color matching and grid-like perforation. There is plenty of legroom in the back row, the armrest is wide, and the electronic button opens the door handle to improve the ride comfort.

In terms of power, the motor has a maximum power of 202 kW /253 kW and is equipped with a ternary lithium battery. The battery-changing version and the long battery life fast charging version are available, with battery life of 600km and 800km respectively. Front and rear double motors, total power 455kW, peak torque 756N·m, 0-100km/h acceleration only 3.9 seconds, equipped with HAP precise automatic driving assistance system.

Zone a 3.2 hall

Chery Fengyun A8

As the Guangzhou Auto Show is about to kick off, our front team successfully photographed Chery Fengyun A8 around the exhibition hall. This new car will be officially unveiled at this year’s Guangzhou Auto Show to meet the fans. Previously, the official map of the new car has been released, which is the Arrizo 8 PHEV model that was unveiled at the Shanghai Auto Show. Now it has been renamed Fengyun A8 after being included in Chery’s brand-new new energy product sequence. According to reliable sources, the new car is expected to be officially listed at the end of this year.

In terms of design, Fengyun A8 is highly consistent with the fuel version of Arrizo 8, showing a strong visual impact. The large mouth grille with dot matrix design on the front face, with the latest flat LOGO of Chery New Energy, shows its new energy identity. In terms of body size, the length, width and height of the new car are 4780/1843/1469mm and the wheelbase is as long as 2790mm, which makes it occupy obvious advantages in the compact automobile market.

Entering the car, the interior also continues the design concept of the fuel version, creating a simple and scientific visual effect. The dual 12.3-inch instrument panel shows a sense of science and technology, and supports the wireless phone mapping function (wireless CarPlay+ Huawei Hicar), so that drivers can keep connected with the world at any time. In terms of configuration, the new car is extremely luxurious, equipped with an openable panoramic sunroof, ventilation and heating functions of the main driver’s seat, etc., providing drivers and passengers with a comfortable and convenient driving experience.

In terms of power, Fengyun A8 will take the first plug-in hybrid system consisting of the fifth-generation ACTECO 1.5TGDI high-efficiency hybrid engine and motor. The maximum power of the engine is 115kW and the maximum torque is 220 Nm. The maximum power of the motor is 150kW and the maximum torque is 310 Nm. The transmission system is matched with DHT150 hybrid gearbox to ensure that the acceleration from 0 to 50 km/h takes only 3 seconds, and the acceleration from 0 to 100 km/h reaches 7 seconds. In addition, the pure battery life of the new car exceeds 100km, and the comprehensive battery life is as high as 1300km, fully demonstrating its high efficiency and environmental protection advantages.

Xingjiyuan ES

At this Guangzhou Auto Show, Star Age ES will officially open for pre-sale. On October 16th, 2023, during Chery Technology DAY, Star Road’s high-end new energy series, Star Era ES, has officially started blind booking. The blind booking price range of new cars is 260,000-360,000 yuan, and a triple gift of blind booking has been introduced. From now on, users can enjoy the car booking rights of "Lifelong Guarding Gift for the Whole Vehicle and Three Power Plants, 6666 yuan Expansion Gift and 5000 points Gift" when ordering 66 yuan.

It is worth mentioning that the Star Age ES first debuted at the 2023 Shanghai Auto Show, positioning medium and large pure electric cars, and completed its overseas debut at the Geneva International Auto Show some time ago, attracting the attention and discussion of many overseas consumers. At present, Star Road Star Era ES has completed the declaration, and the new car will be listed this year.

In terms of appearance, Star Road Star Era ES has adopted a brand-new design style, with a simple and elegant front face, a penetrating LED strip, a wing-shaped light group below and different decorative styles.

On the side of the car body, it adopts slip-back shape and is equipped with hidden door handles. According to different models, 19-inch, 20-inch and 21-inch wheels are available. In terms of body size, the length, width and height of the new car are 4945mm/1978/1489(1480 mm and 1467mm) respectively, and the wheelbase is 3000mm, which is similar to the Krypton 001 as a whole.

The tail shape is also very simple, using a flat through-type rear taillight group, and the lower rear enclosure is also decorated with black decorative panels, which enhances the sense of movement.

In the interior part, according to the appearance of the previous Shanghai Auto Show, the ES interior of Xingtu Xingyu Era adopts an embracing design style, equipped with a large-scale suspended central control screen, an all-LCD instrument panel and a dual-spoke multi-function steering wheel, and adopts a gear shifting mode. At the same time, the electric seat adjustment of the new car is designed at the door panel position, and two mobile phone wireless charging boards are also designed under the central control screen.

In terms of power, according to the application information, Star Road Star Era ES offers single-motor version and double-motor version, in which the single-motor version is divided into high and low power adjustment, and the maximum power is 185 kW (252 HP) and 230 kW (313 HP) respectively. The comprehensive power of the dual-motor version system is 353 kW (480 HP), and the acceleration time of 100 km will reach 3 seconds.

In terms of battery life, combined with the previous information, the new car is built on the new electric platform E0X of Chery Group, which supports 800-volt voltage system. At the same time, it will also adopt the battery pack of Chery NP2.0 technology, with a maximum cruising range of over 700 kilometers. At the same time, in the fast charging mode, it can achieve a cruising range of 150km in 5 minutes, and the battery can be charged from 30% to 80% in 15 minutes. In addition, the new car will be equipped with air suspension and CDC continuous damping control system.

Zone a hall 4.1

Tank 300Hi4-T

Some time ago, Great Wall executives said on social media that the tank 300Hi4-T is expected to be unveiled at the Guangzhou Auto Show. The new car is equipped with a plug-in hybrid system consisting of a 2.0T turbocharged engine and a motor, and the power is expected to be even better. Together with the previously launched fuel and HEV, the tank 300 will have three kinds of power.

In terms of appearance, the appearance of the new car is basically the same as that of the fuel version. The circular headlights are designed, and there are three horizontally arranged LED light groups in the interior, in which the circular outline of the middle light group extends all the way to the side of the car body. According to the declaration map, the new car can choose different styles of front face and rim, as well as wading throat, rim, towing hook hole, electric connector, luggage rack, exterior rearview mirror, electric side pedal, back door handle, side door handle, etc.

The new car still uses an external spare tire, with a square and tough body design and protruding black wheel eyebrows. The shape is wild and the tailgate is designed to open horizontally to the right. In terms of body size, the length, width and height of the new car are 4760/1930/1903mm and the wheelbase is 2750mm respectively.

In terms of power, the new car is equipped with a 2.0T engine with a maximum power of 185kW, and the battery uses a ternary lithium battery provided by honeycomb energy. After the introduction of PHEV plug-in hybrid model, plus the previously launched fuel and HEV, the tank 300 will have three kinds of power.

Tank 700Hi4-T

On November 13th, the first edition of the tank 700Hi4-T was officially unveiled. The new car is the third model built by the Hi4-T off-road super hybrid architecture of Great Wall Motor. It will be released and pre-sold at this year’s Guangzhou Auto Show. The pre-sale price may start at 700,000 yuan, and there may be a unique model name in the future. Officially, it will be positioned as "the best off-road SUV of one million classes" and directly compete for Mercedes-Benz G-class.

In terms of appearance, the overall outline of the first edition of the tank 700Hi4-T is different from the shape of the square box of the tank 300, but there are many inclined planes, which add some sports and fashion atmosphere while being tough. Under the blessing of the kit, the front face of the new car is very domineering, and the large-size mesh adopts irregular shape, and the grille is decorated with chrome in array; The sports style of the front bumper is exaggerated, which makes the domineering front face look more fierce, using carbon fiber material; The new car also adopts a wide-body wheel eyebrow design, which has more lateral tension from the front and adds points to the visual effect.

The new car will be adopted3.0T longitudinal six-cylinder engine +9HAT hybrid special gearbox +P2 motor configuration oil-electricity parallel hybrid.The power system combination of. The interior layout of the new car has not been announced yet, and it still needs to wait for the official follow-up communication arrangements.

BMW 5 Series/BMW i5

The cumulative production of BMW 5 Series has reached 10 million units, and it has been favored by 2 million customers since it was extended in China. The new generation of domestic BMW 5 Series will be unveiled at Guangzhou Auto Show, and it will be lengthened.

Referring to overseas models, the BMW 5 Series adopts the most popular ring-shaped grille and boomerang daytime running lights of BMW brand, and the four ribs raised on the front hood also make the front of the car look more dynamic. The front face of the new car re-deconstructs the design of headlights and grille. The daytime running lights are arranged vertically, and the sense of proportion is more square. The grille also follows the current BMW car habit, and the BMW IconicGlow ring light strip is embedded.

The profile of the 5 Series also bid farewell to the steady tonality. A large number of geometric lines create a strange facade, and when it comes to the connection between the C-pillar and the rear of the car, it suddenly falls rapidly. In particular, the famous Hoxhorn corner has been re-interpreted, and there is a decorative board outside the corner. The small tailgate window here looks like a frameless car door, which not only makes the appearance smoother, but also helps to suppress wind noise. The new BMW 5 Series overseas has a length, width and height of 5060mm*1900mm*1515mm respectively, and the wheelbase has been lengthened by 20mm to reach 2995mm. To be sure, the new BMW made in China will be longer than the overseas version.

The tail design has also changed greatly. At first glance, the iconic L-shaped taillights seem to be gone. But in fact, the light group adopts a more slender and exquisite transverse LED strip, and the L-shape is not so obvious.

Debut with the new BMW 5 Series and the new BMW i5, referring to the overseas version, its most obvious logo with EV status uses a fully enclosed kidney design.

In terms of interior, the new BMW 5 Series overseas is the latest family style, including the continuous screen design of 12.3-inch instrument +14.9-inch central control panel, and the latest sports steering wheel. The new car will be equipped with iDrive 8.5 system, which is developed based on Linux system. The new system introduces the design of QuickSelect to improve the menu structure, so that drivers can access the set common functions quickly and conveniently. I believe that these configurations will be retained after domestic production.

It is worth noting that. The new domestic BMW 5 Series will be equipped with a rear suspended giant screen. This luxurious configuration from BMW 7 Series will become its exclusive option (not available in overseas versions). The screen size reaches 31 inches, the resolution is 8K, and it supports real-time interconnection. At the same time, the new car will also be equipped with Bowers & Wilkins surround sound system, four-zone automatic independent air conditioning (with independent control panel in the back row) and other high-level configurations. Finally, the front seat backrest will also be equipped with the Chinese character "five" exclusive logo, highlighting its own domestic model identity.

In terms of power, referring to some overseas models, the 520i is equipped with a 2.0T inline four-cylinder gasoline engine (including 48V light mixing technology) and matched with an 8-speed Steptronic Sport automatic manual transmission. The maximum output power is 153kW(208PS), and the 48V motor provides 13kW/18 horsepower and 200N·m, with a peak torque of 330N·m and an acceleration time of 7.5 seconds. The i5 eDrive40 adopts a single rear-drive motor, with a net battery capacity of 81.2kWh. The output power of the motor is 230kW(313PS), which is 250kW/340 HP after choosing the motion mode of My Modes, and the motor torque is 400N·m, etc.

Zone a hall 4.2

Tengshi D9 Four-seat Production Edition

At this year’s auto show, Tengshi D9 four-seat production version will be officially launched, while at the previous 2023 Shanghai Auto Show, Tengshi D9 PREMIER four-seat founding version has been officially unveiled, so we can also learn some highlights of the four-seat production version first. The new car adopts a four-seat custom design, and the exterior interior is different from the ordinary version of D9. The original version of D9 has been accepted, and the new car is expected to be officially delivered in the first quarter of 2024.

The four-seat appearance of the founding edition of D9 PREMIER maintains the design of the ordinary edition, and it is full of gas field. The original version has its own body color-bright purple, which will show different color changes when the body is in different lighting environments. At the same time, the roof and tailgate are matched with beige metallic paint.

The interior color matching also adopts the design style of "double spelling", and the matching color matching of purple and beige is customized. The design of the front inner cabin is also consistent with the ordinary version. The official said that the four seats of the original edition of D9 PREMIER adopted the PREMIER high-definition smart cockpit. The central control big screen is equipped with Tengshi Link super-intelligent interaction, which supports ten scenario modes such as Tengshi SHARE multi-screen sharing and nap mode, customized game car mode, OTA upgrade and so on.

The essence of the original version of D9 lies in the second row. The third row of seats was removed and the rear cabin was changed into two seats, which greatly improved the space performance. Two independent and spacious seats integrate a variety of comfort functions, and the rear cabin and the front row are separated by a large display screen, and all designs are based on a sense of dignity. In addition, users of the founding edition will have three exclusive privileges, namely, creating peers together, communicating together and sharing win-win, and seven exclusive founder privileges, including "Mr. Wang personally signed the car model, exclusive butler and exclusive partner privileges".

In terms of power, Tengshi D9 DM-i model is equipped with Xiaoyun-plug-in special 1.5T turbocharged engine. The NEDC with two-wheel drive has a pure battery life of up to 190km, and the fuel consumption is as low as 5.9L/100km;. The four-wheel drive model has a pure battery life of 180km, and the fuel consumption is 6.7L/100km. The pure electric vehicle CLTC has a maximum cruising range of 620km, and is equipped with two DC charging ports that can be charged at the same time. The maximum charging power is 166kW, and the cruising range can be supplemented by 230km in 15 minutes. The chassis adopts front McPherson and rear multi-link suspension structure, comes standard with FSD variable damping suspension system, and the high-equipped models also provide Disus-C electronically controlled damping shock absorption, which can realize millisecond intelligent soft and hard adjustment and further improve comfort.

Wuling xingguang PHEV

Wuling Starlight, Wuling’s first car, will be pre-sold at Guangzhou Auto Show. The PHEV plug-in hybrid model will be the first to be pre-sold, and will be listed at the end of November or early December. The future price may be around 100,000 yuan.

In terms of appearance, Wuling Xingguang adopts the brand-new design language of Wuling family, and its front face is very advanced, which has a sense of sight of luxury cars. It is hard to believe that this is actually from Wuling’s hands. I have to say that Wuling’s design transformation is very successful. Among them, the pure electric version is designed with a closed middle net, and adopts split headlights. The headlight group is very slender and sharp, with a very sporty front surround, which has great visual impact. The plug-in version is equipped with star-ring daytime running lights and similar lattice air intake grille, which looks more exquisite.

On the side of the car body, the car body lines are very rich, and it adopts a slip-back shape, equipped with hidden door handles and 18-inch star wheels, which is very sporty. In the rear part, Wuling Starlight adopts the popular through taillight group design, and its shape is relatively unique, which has high recognition after lighting. In addition, both sides of the rear enclosure are decorated with matte decorative strips, which enhances the sporty atmosphere. In terms of size, the length, width and height of Wuling Starlight are 4835/1860/1515mm and the wheelbase is 2800mm respectively, which has reached the standard of medium-sized cars and can be compared with BYD Seal and Deep Blue SL03.

According to the official map, Wuling starlight interior adopts color matching design, providing two interior colors of dark black and light sand color matching, which is simple and spacious as a whole, and double coating of leather and sponge is carried out for six high-frequency contact areas of the interior. Among them, the dual-screen layout is also a popular element. The dashboard is an 8.8-inch ultra-clear digital LED screen, and the 15.6-inch intelligent central control screen is the visual center of the whole interior, and it is equipped with rich social entertainment software such as iQiyi and QQ music, which can create a home theater cockpit atmosphere. After further reducing the physical buttons, most central control functions will be integrated into the central control screen.

There are two USB ports in the front and rear rows of the new car, and the charging power can reach up to 20W, which supports fast charging. There are 6 air outlets in the back of the seat, equipped with ISOFIX child safety seat interface. In terms of storage space, Starlight has set up more than 14 storage spaces in the whole car, and the front row adopts double-layer structure, which makes the storage space richer and more convenient to store. The trunk has a basic volume of 540L, which can easily accommodate two 24-inch plus two 20-inch suitcases. There is also a 33L hidden storage compartment under the trunk carpet, so the owner’s private belongings can also be properly kept.

In terms of seating space, the new car has a unique "recliner design". The front seats can be laid back 180 to be flush with the rear seat cushion to form a recliner, so you can enjoy an immersive "lying flat" leisure time during long-distance travel; The back aisle is 390mm wide, and the longest leg space is 1 meter. The sitting posture in the back row can be freely played without restriction.

Starlight "embracing and relaxing pressure" seat is ergonomically designed, and the soft area and hard area are divided by double hardness foaming process, and the fitting area between the seat and human body is as high as 110000 mm; The sides of the seat are also designed with strong support, and the head and neck area is supported by recessed embedded support, giving consideration to support and comfort as a whole; The new car is equipped with 6-way electric adjustment of the main drive.

In terms of power, the pure electric version will be equipped with a motor with a maximum power of 100 kW; The plug-in hybrid version will be equipped with a plug-in hybrid system consisting of a 1.5L engine and a motor, in which the maximum power of the engine is 78 kW.

BYD Sea Lion 07

A few days ago, the design manuscript of its brand-new model Haishi 07 EV was obtained from BYD official. The new car is a member of Ocean Net series, positioning pure electric SUV, based on E platform 3.0, and adopting cross-border design. It is reported that the car will make its world debut at the Guangzhou Auto Show, which opened on November 17th.

In terms of appearance, BYD Sea Lion 07 EV was created by the design team led by BYD’s global styling director Wolfgang Eiger. Based on the success of marine aesthetic design, it presents us with the essence of a new generation of styling design. The front face continues the design of the Ocean X concept car. Based on the X-shaped structure with mysterious marine temperament, the sharp line cutting enriches the layering and three-dimensional sense of the front of the car, and is connected with the headlights on both sides, stretching the visual width of the front face.

On the side of the car body, the Sea Lion 07 EV adopts a slip-back shape, and the beautiful and smooth curve of the roof extends to the rear of the car, forming a modern and fashionable design, which makes the car body more elegant. The rising shoulder line is matched with the unique large-size wide-body wheel eyebrows and five-spoke wheels, showing a strong sense of movement.

At the rear of the car body, it is equipped with the popular through taillight design, and the drooping shapes at both ends show the surface tension of seawater, which skillfully integrates marine elements and echoes the front face. In addition, rich straight lines and flexible curves are intertwined, which constitutes a strong visual impact.

In terms of power, Haishi 07 EV is built based on BYD e platform 3.0 and driven by pure electric power. Referring to the power layout of BYD Seal EV, Haishi 07 EV is expected to provide two kinds of power: single-motor rear drive and dual-motor four-wheel drive.

In addition, it is worth mentioning that it is learned from relevant channels that all SUVs under the Ocean Net series are grouped under the sea lion, and all cars are grouped under the seal, and the warship series will be gradually cancelled. In the future, the IP of the Ocean Net will be seagull, dolphin, seal and sea lion respectively, which means that BYD brand will launch models such as Sea Lion 05 and Sea Lion 09 in the future.

Zone a hall 5.1

Beijing Benz Long Wheelbase E-Class

A new generation of domestic Mercedes-Benz E-Class long wheelbase version will be officially launched at Guangzhou Auto Show. The new car is built on the same MRA2 platform as Mercedes-Benz S-Class, and continues to provide double-body design, equipped with the third-generation MBUX system, built-in Snapdragon 8295 chip, and the first L2+ navigation-assisted driving system. On the basis of luxury, the intelligent experience is greatly increased, and the comprehensive strength is greatly improved.

In terms of appearance, the Mercedes-Benz E-Class long wheelbase version continues the design of the overseas wheelbase version, adopts the latest family-style design style, and incorporates the design elements of the pure electric EQ series, making it look like a strong new energy vehicle style. The new car offers two appearance versions to choose from, namely, the "big standard" which focuses on sports and the "vertical standard" which focuses on luxury administration. The difference is mainly reflected in the interior shape of the grille and the front enclosing style, which style is better depends on people.

On the side of the car body, the design of short front suspension and long rear suspension is still adopted. The car body lines are straight and stretched, and the visual effect is very elegant. The drag coefficient is as low as 0.23Cd. At the same time, a brand-new style of wheels has been replaced, which increases the recognition of the side of the new car. In terms of body size, the length, width and height of the new long-wheelbase E-Class are 5092/1880/1493mm and the wheelbase is 3094mm respectively. In contrast, the length, width and height of the new Mercedes-Benz E-Class standard wheelbase version are 4949/1880/1468mm and the wheelbase is 2961mm, respectively. Except for the body width, other parameters have been improved. In addition, for comparison, the length, width and height of the current long-wheelbase Mercedes-Benz E-Class are 5078/1860/1480mm and the wheelbase is 3079mm, respectively.

For the rear of the car, the taillights have adopted a brand-new design. Although the current popular penetrating taillight design is not adopted, a chrome trim is used to connect the taillights on both sides to create the effect of penetrating taillights. At the same time, the internal structure of the taillight adopts the shape similar to the brand LOGO, and the recognition degree is directly full after lighting.

In terms of interior, the new wheelbase version of E-Class did not continue the design language of Mercedes-Benz S-Class and mercedes benz c-Class, but borrowed from the design of Mercedes-Benz EQS, and adopted a three-screen center console layout called "MBUX Super Screen" by Mercedes-Benz, consisting of a 12.3-inch full LCD instrument panel, a 14.4-inch central display screen and a 12.3-inch passenger entertainment screen, and equipped with a three-spoke multi-function steering wheel in the style of "Dragonfly"

In addition to the visual shock, the new car is also equipped with the third-generation MBUX intelligent human-computer interaction system, and is built with the latest generation 8295 intelligent cockpit chip from Qualcomm. Compared with the 8155 chip, its GPU performance is improved by 2 times and 3D rendering performance is improved by 3 times, which can provide faster communication services.

At the same time, the new car has upgraded the brand-new "Mind Reading Voice Assistant" function, which is more accurate in recognition and faster in response. It supports the whole scene without waking up, improves the response speed, colloquial language and multi-command recognition, and can also control the vehicle through voice. For example, if you say "Start Smart Parking", you can turn on this function directly.

In addition, the new long-wheelbase E-Class is also equipped with L2+ class driving assistance system, which can cover high-speed and urban expressway sections, and has the ability to realize high-speed point-to-point navigation assistance driving, and has the functions of automatically changing lanes, automatically leaving the cart, and automatically entering and leaving the ramp.

In terms of power, it was not introduced at the press conference, but according to the previous application information, the domestic long-axis model will be equipped with M254 2.0T engine, which is divided into high and low power adjustment, and the maximum power of the E 260 L model is 204 horsepower; The maximum power of the E 300 L model is 258 horsepower, the transmission system is matched with a 9-speed automatic manual transmission, and some models are equipped with a four-wheel drive system.

It is expected that a 48V light mixing system will be added to the whole system, and the second generation ISG starter/generator will be used, which can provide an additional 23 horsepower and 205 Nm of assistance to achieve better power responsiveness and fuel economy. The acceleration time of low-power models is 7.5 seconds.

In addition, it is worth mentioning that in order to meet the demand of new energy market, the new E-Class has also launched two plug-in hybrid versions, E 300 e and E400 e, in overseas markets. Both cars are equipped with the fourth generation plug-in hybrid technology of Mercedes-Benz, and the plug-in hybrid system consisting of 2.0T engine, drive motor and battery has comprehensive power of 313 HP and 381 HP respectively, and the 0-100km/h acceleration is 6.4 seconds and 5.3 respectively.

Its battery capacity is 25.4 kWh, and the cruising range of pure electricity is over 100 kilometers under WLTP working conditions, and the battery can be charged from 0% to 100% in about 30 minutes through 55 kW DC fast charging. It is expected that the domestic market will be introduced in the future to further enhance the product matrix.

New Mercedes-Benz CLE coupe

The brand-new Mercedes-Benz CLE coupe will be officially launched at Guangzhou Auto Show. As a new product combining mercedes benz c-class coupe and E-class coupe, Mercedes-Benz CLE inherits the beautiful body structure of coupe, which has a hardtop version and a convertible version, and the wheelbase reaches 2865mm, which is more advantageous than competitors such as BMW 4 Series and Audi A5.

Mercedes-Benz CLE and C-Class are "close", but the front face is more like CLA coupe, and the internal DIGITAL LIGHT headlights make the new car look radiant. The iconic trapezoidal air intake grille is embedded with lattice starlight decoration, and it has spread to the bumper area below, while the design of diffusers on both sides and the lower air intake continues the latest Mercedes-Benz design style, which is believed to be very familiar to all friends who pay attention to Mercedes-Benz.

Mercedes-Benz has been an expert in shaping elegant sports cars for decades, and coming to CLE is no exception. The target group of this kind of urban fashionable sports car is mostly hedonistic buyers, so the side of the new car doesn’t need to behave like a common medium-sized car. The long hood, steep windshield and drooping tail are all attractive physical characteristics of CLE. In terms of body size, the length, width and height of CLE are 4850mm/1860mm/1428mm, and the wheelbase is 2865 mm. Compared with domestic C-class cars, the length and height data are reduced, but the width is 40mm, so it is more flat and beautiful in proportion. The transition of the rear surface is very smooth. The LED taillights with new contours have a three-dimensional structure inside, and can also provide a light show to welcome and bid farewell to passengers. The middle parts of the taillights on both sides are connected by crimson decorative plates. However, Xiao Bian also thinks that viewing CLE from the rear 45 is somewhat similar to that of the British and finidi Q60 coupe.

When we came to the interior, CLE also continued the concept of luxury yacht. I believe everyone will be familiar with the 12.3-inch LCD dashboard and 11.9-inch OLED touch vertical screen. In order to facilitate the operation, the central control screen is also slightly tilted to the driver by 6 degrees. In addition, the details of the entire central control design can also be seen from the new C-class, including the radian corner of the decorative board, the air conditioning outlet inspired by the aircraft turbine, etc. Such details can make passengers feel Mercedes-Benz’s deep understanding of the luxury cockpit.

Mercedes-Benz’s front integrated sports seat specially designed for CLE coupe and convertible coupe provides 7-zone massage function. Pull the elegant Nappa leather pull ring, and the new "EASY-ENTRY" function can fold the front seat forward, which is convenient for passengers to enter the rear space calmly. The 64-color active ambient light provides a variety of ambience themes. The Burmester Voice of Berlin 3D surround sound system is equipped with two speakers at the headrest position of each seat. The total number of speakers in the whole car is 17 with Dolby panoramic sound to restore the ultimate acoustic effect.

The new CLE coupe and convertible coupe provide sports suspension system, which can reduce the body height by 15mm. In addition, the new car also provides an active steering system for rear wheels, as well as intelligent driving assistance functions such as intelligent navigation distance limit, active lane keeping, speed limit assistance and intelligent parking.

In terms of power, Mercedes-Benz CLE shares the powertrain with the current C-Class, providing different gasoline and diesel versions such as CLE 200, CLE 300, CLE 300e, CLE 220d, CLE 450 4MATIC, etc., with a 48V light mixing system as standard. Among them, the most powerful version is CLE 450 4MATIC, equipped with a 3.0L straight six-engine (code M256 M), with a maximum power of 280kW(381HP), a peak torque of 500N·m and an acceleration time of 4.4 seconds from 0 to 100 km/h. It is reported that Mercedes-Benz will also launch the plug-in hybrid AMG version of CLE in the future, which is expected to be equipped with M256 3.0T engine with a maximum power of 435 HP and a peak torque of 560 Nm. CLE 63 is a plug-in hybrid version, and it is expected to adopt a plug-in hybrid system consisting of the same 2.0T turbocharged four-cylinder engine and motor as AMG C 63.

Yinhe E8

We learned from the official office of Geely Yinhe that the Geely Yinhe E8 will be unveiled at the Guangzhou Auto Show, which will open on November 17th. The new car is the third model of Geely Yinhe brand and the first model of "Smart Pure Electric E Series". It is built on the vast structure of SEA, adopts a brand-new design style, is equipped with an ultra-wide 45-inch 8K unbounded smart screen, and is equipped with Qualcomm’s fourth-generation car cockpit chip Snapdragon 8295.

In terms of appearance, the biggest highlight of Geely Galaxy E8 is the adoption of the world’s first mass-produced integrated luminous front face, which can present rich luminous effects such as welcoming farewell, flowing water, jumping water and music show.

Geely Yinhe E8 is also equipped with AGS active air intake grille, and with 25 low wind resistance designs such as low wind resistance closed pneumatic rims, the wind resistance coefficient of Geely Yinhe E8 is only 0.199cd..

In terms of body size, the length, width and height of Geely Yinhe E8 are 5010/1920/1465mm and the wheelbase is 2925mm, which is similar to that of BYD Han EV as a whole.

For the interior, Geely Galaxy E8 is equipped with an exaggerated 45-inch Dalian screen, with a length of 1.157m and a height of 0.159m, an image resolution of 8K, and an effective display area of 1130mm * 138mm, which is the widest among the current production models.

At the same time, the new car is also equipped with a new generation of Qualcomm Snapdragon 8295 flagship cockpit chip and a brand-new car system. The chip adopts 5nm process technology, and the 3D rendering performance of GPU is improved by 3 times compared with that of 8155, and the GPU is improved by 2 times, and the AI computing power is even more terrible at 30TOPS, which is 7.5 times that of 8155 chip.

In terms of configuration, Geely Galaxy E8 will be equipped with 256-color atmosphere, electric suction door, 50W mobile phone wireless charging, 25.6-inch AR-HUD head-up display, Harman INFINITY hi-fi 12 sound system, FACE ID face recognition and car fragrance system.

In terms of power, the application information shows that the new car will be equipped with an electric motor provided by Weirui Electric Vehicle Technology (Ningbo) Co., Ltd., with a maximum power of 200 kW.

Zone a hall 5.2

Dongfeng Nissan Pathfinder

The 2023 Guangzhou Auto Show is about to kick off, and our front team captured the Dongfeng Nissan Pathfinder model around the exhibition hall. This new car will make a cool debut at this auto show, and has been declared by the Ministry of Industry and Information Technology.

Dongfeng Nissan Pathfinder has a wheelbase of 2900mm, a grand body size and a stylish overall shape. In terms of appearance, the new car adopts the latest family-style front face design, and the large-size front grille is integrated with horizontal chrome trim, which is skillfully integrated with the headlights on both sides. The three-stage air intake design adds a sporty atmosphere and makes the appearance of the vehicle more dynamic.

The side lines of the car body are steady and smooth, and the waistline running through the front and back highlights the sense of strength. The tail shape is unique, and the long and narrow headlight group is perfectly integrated with the black plaque and brand LOGO, showing a strong visual layering.

The size of the new car is huge, with the length, width and height of 5130/1981/1767mm respectively. In the mass production version, the overall design language of the interior is the same as that of the concept car, but the details are slightly different. For example, a large number of soft coverings are still retained, and the stepped double screen design similar to Ariya is full of scientific sense. The slender air conditioning air outlet, clean and tidy horizontal layout center console and three-position steering wheel similar to the current Qijun all follow the design of the concept car. Seats are expected to remain comfortable and thick, with exquisite materials, and six/seven different layouts will be provided for you to choose from.

However, in terms of power, the curb weight of this medium and large SUV has reached 2132kg, and it seems that it is only equipped with a 2.0T turbocharged engine with a maximum output of 185kW(252Ps). This SUV is slightly conservative in the power system. Considering that Pathfinder is a sister model of QX60 in Britain and finidi in overseas markets, this 2.0T engine is likely to be the same model as QX60. According to the previous test drive experience of QX60, although this power system is not enough to dominate the road, its performance is quite flexible and light in daily car scenes.

Lotus EMEYA

Recently, Lotus announced that its brand-new pure electric supercar Emeya will be released at Guangzhou Auto Show. The design of the new car reproduces the design aesthetics of Lotus’ early iconic mid-engine sports car, adding the exclusive supercar pore design language, suspended double-layer tail technology, etc., and the acceleration of zero hundred is 2.78 seconds. In addition, Lotus will also release a road bike with electric power-Type 136. The overall weight of the car is only 9.8kg, and the price will be officially announced at the Guangzhou Auto Show.

In terms of appearance, Emeya adopts a streamlined design, which perfectly combines aerodynamics and artistic aesthetics. Its shape is inspired by the classic super-running design of Lotus, and the layout of the mid-engine makes the center of gravity of the whole vehicle lower, providing a more stable driving experience. At the same time, the appearance of Emeya is also full of modernity. The unique LED lighting group and sharp lines make it eye-catching at night and during the day.

On the basis of following the iconic aerodynamic design of Lotus, Emeya has continuously innovated, and the whole vehicle has adopted the porous design constructed by four groups of Race-Aero aerodynamic ducts. This design allows airflow to pass through the car body, which reduces wind resistance and brings additional downforce, effectively improving the grip and handling performance of the vehicle on the track and on the road. At the same time, this design also improves the vehicle performance, battery cooling and endurance, and further enhances the visual impact of the appearance.

The front of the car body is equipped with an active air dam and an active air intake grille for the first time on the pure electric supercar SUV Lotus Eletre. Active air dam can increase the downforce when driving at high speed, thus improving the accuracy and stability of handling, and making Emeya a car that can stimulate driving desire. The active air intake grille can be closed when the wind resistance needs to be reduced, improving the energy efficiency of the vehicle; When it is necessary to cool the electric drive system and brake system, it is turned on, and air is sucked to dissipate heat.

Aerodynamic kits such as active rear diffuser and active tail wing are adopted at the rear of the car body to further enhance the stability of the rear of the car and bring unparalleled handling performance and driving stability to the driver. The design of the active rear diffuser is inspired by racing, which can effectively avoid the turbulence under the car. The industry-leading active double-layer tail wing, with a width of 296 mm, can provide a net downforce of more than 215 kg, and cooperate with the active rear diffuser to give drivers a more stable handling feeling when driving at high speed.

In addition, Emeya is equipped with an advanced air suspension system, which can automatically adjust the height and damping of the car body according to the driving mode. This system provides drivers with a more comfortable and stable driving experience, and also enhances the handling performance and driving stability of the vehicle. The 50:50 axle load ratio design allows the vehicle to have both sports and comfort.

In the interior, Emeya adopts advanced materials and exquisite craftsmanship to create a comfortable and technological driving environment. The center console and seats are made of luxurious leather with delicate touch; The dashboard and the central control screen use high-definition LCD screens, providing a more intuitive and convenient driving experience. In addition, Emeya is equipped with advanced driver assistance system, including automatic parking, adaptive cruise and other functions, which makes driving easier.

The materials used in the new car use a lot of world-leading advanced environmental protection materials, including durable new recycled fiber wires and many luxurious materials. PVD coating is added to the contacts of the cabin interior of Emeya, which brings a unique color and a warm touch on the fingertips.

Eletre’s penetrating ultra-thin instrument panel is also mounted in the Emeya cockpit. The instrument panel is made of lightweight materials and streamlined design, which not only has high adaptability, but also has the capabilities of super charging, high energy saving and extremely fast data transmission.

Emeya has an intelligent partition PDLC panoramic canopy, which can be divided into 10 controllable partitions according to demand, showing a variety of personalized canopy shelter driving, with an overall area of 2.4㎡.

In terms of performance, Emeya is equipped with an efficient motor and battery pack, which provides powerful power output and endurance. It is reported that Emeya’s 0-100km/h acceleration time is only 2.78 seconds, and the top speed can reach 250km/h, which is comparable to the top fuel supercar. In addition to the first time, the new car is equipped with a 10-piston carbon ceramic compliant braking system, which reduces the braking distance of 100 kilometers to less than 33 meters.

In addition, the cruising range of Emeya is also considerable. According to different configuration versions, the maximum cruising range can reach more than 500 kilometers. In terms of charging, the new car is equipped with Lotus’s leading flash charging technology EPA 800V high-performance architecture, with a maximum charging power of 480kW. It only takes 5 minutes to charge to increase the cruising range of 180 kilometers (under CLTC standard). In fast charge mode, the power can be increased from 10% to 80% within 15 minutes.

Hall 17.2, Floor 2, Zone D

Extreme krypton 007

On November 15th, Krypton officially announced the official interior map of its brand-new car, Krypton 007. The new car is produced on the PMA2+ platform under the vast structure of SEA, which is the same platform as Geely Galaxy E8. It is reported that the new car will also be equipped with 8295 chips and high-order intelligent assisted driving system, and will be pre-sold at the Guangzhou Auto Show, which will open on November 17.

From the official map, the interior of Krypton 007 continues the family-style design, and has not undergone drastic changes like the appearance. The overall style is simple and fresh, with an oversized suspended central control panel and a double-spoke flat-bottomed steering wheel, and the design is similar to the design of Krypton X.

At the same time, the new car also adopts double color matching and double stitching design, the ceiling is made of Microfiber microfiber, and the seat is Soft Nappa full-grain leather, which adds a luxurious atmosphere inside the car. In addition, in terms of details, the new car is also equipped with metallic coat hooks and luxury glasses boxes, with exquisite details all over the cabin, showing the ultimate.

Looking back at the appearance, Kyk 007 adopts a minimalist design style, led by Stefan Sielaff, the world’s top designer, with a rounded front face, equipped with the industry’s first 90-inch ultra-wide display area ZEEKR STARGATE integrated smart light curtain, which supports the customization of light language and is equipped with a luminous brand LOGO to further emphasize the sense of science and technology.

The side of the car body is simple, with a slip-back shape, a hidden door handle and large-size petal-shaped wheels, and the visual effect is very advanced. The rear of the car is designed with penetrating taillights, which has good recognition after lighting.

In terms of body size, the length, width, height and wheelbase of Krypton 007 are 4865/1900/1450mm and 2928mm, respectively, which is slightly smaller than that of Tesla Model 3 and similar to that of Tucki P7 and Weilai ET5 on the whole.

In addition, the roof of the polar krypton 007 is also equipped with a lidar, which is expected to be equipped with a high-order intelligent assisted driving system. At the same time, it is understood that the new car will adopt double wishbone front independent suspension, equipped with 800V electrical architecture, Snapdragon 8295 chip and so on, and its comprehensive strength is very strong.

According to the positioning of Krypton 007, combined with the price of Krypton 001 (with a limited price of 269,000 yuan) and Krypton X (with a price range of 1898-229,800 yuan), it is estimated that its price may be between 210,000-260,000 yuan, and there is a high probability that it will overlap with Geely Galaxy E8. How to choose it is another big problem. Of course, we’ll see what the specific pre-sale price is on November 17th.

Hall 18.2, Floor 2, Zone D

Zero run C10

As the Guangzhou Auto Show is about to kick off, our front team successfully photographed the figure of Zero Run C10 around the exhibition hall. At the Munich Auto Show in 2023, Zero Run has officially released its first model C10 for the global market. Based on the "four-leaf clover" central integrated electronic and electrical architecture, the car provides two power options: extended range and pure electricity, and is equipped with laser radar, which is expected to have high-order assisted driving ability. At this Guangzhou Auto Show, Zero Run C10 will unveil the mystery of interior design.

The Zero Run C10 continues the family-style design concept, with a penetrating light strip and a wide front enclosure shape, with a trapezoidal radiator below, and the corners on both sides are more powerful. The car side profile is smooth, the car window frame is equipped with black highlights, and a hidden door handle and a 20-inch rim are used.

The rear of the car is equipped with a penetrating light strip, and the taillight design has been optimized to be more recognizable. In addition, spoiler and duckling tail are added to the tail. There is a laser radar on the roof, and several cameras on the front fender and exterior rearview mirror. It is expected that the car will support high-order driving assistance functions.

The whole vehicle is equipped with 30 auxiliary driving hardware, including 12 cameras, 5 millimeter-wave radars, 12 ultrasonic radars and 1 laser radar, which can support urban/high-speed NAP navigation and expand to L3 intelligent driving capability through OTA upgrade.

In the future, the new products of the zero-run car will apply the 800-volt platform silicon carbide technology and provide three oil-cooled electric drive technologies. The maximum power of a single motor is from 170 kW to 250 kW, and the peak torque is from 320 Nm to 360 Nm. In the future, the zero sports car will also adopt CTC 2.0 (battery body integration) technology, which is compatible with 800 V /4C overcharge technology, and the battery life will increase by 200 kilometers after charging for 10 minutes.

Ideality MEGA

Since Li Xiang, CEO of Ideal LI, published the official map of Ideal MEGA on personal social media, this ideal first MPV has been controversial. The main reason is that it looks like a high-speed rail, which can ensure the space, and it can also be comparable to the drag coefficient of a car. Therefore, under the blessing of this design topic, there is also a hot sale of the L series in the early stage. Even if consumers have not seen the real car, Ideal will receive a large wave of booking orders.

Compared with the traditional MPV, the ideal MEGA has a unique styling style, with very smooth body lines and bullet-like styling like high-speed rail, which is officially described as "high-speed rail". The biggest advantage of this design is to improve the aerodynamic performance of the vehicle, but also to add a high-end, fashionable atmosphere for the vehicle and strengthen the recognition. The wind drag coefficient is only 0.215Cd, breaking the record of mass production MPV and becoming the lowest MPV in the world. Then what is the concept of drag coefficient of 0.215? Comparing with several popular new energy cars, the drag coefficient of Weilai ET7 is 0.208, the drag coefficient of dark blue SL03 is 0.23, and even the drag coefficient of Tesla Model 3 and Porsche Taycan is 0.22Cd, while the drag coefficient of Krypton 009, both MPV, is 0.27Cd. Then the wind resistance of an ideal MEGA with such a large size can be comparable to that of a pure electric car.

The advantage of low drag coefficient is mainly reflected in energy consumption control. For every 0.01Cd reduction in drag coefficient, CLTC’s pure electric cruising range is increased by 7 kilometers (under the same circumstances), while MPV is always difficult to break through because most of the vans are designed. Then the comprehensive power consumption of the ideal MEGA and CLTC with dual-motor four-wheel drive series is only 15.9kWh/100km. Similarly, for comparison, the energy consumption of Krypton 009 is 18.3kWh/100km, and the potential D9 is 18.4kWh/100km.

In terms of body size, the length, width and height of the ideal MEGA are 5350/1965/1850mm and the wheelbase is 3300mm, which is larger than the medium and large MPVs such as Tengshi D9 and Extreme Krypton 009. In terms of space, the depth of the trunk of the new car is 680mm in the state of 7 seats, and the three rows of seats have electric folding function. After folding, the depth of the trunk is 1066 mm. Compared with Krypton 009 and Tengshi D9, the body length and wheelbase of the ideal MEGA have obvious advantages.

Under such low wind resistance endurance performance, I believe there will be good performance in endurance. The ideal official said that the ideal MEGA will be equipped with an 800V high-voltage fast charging platform, equipped with a 5C Kirin battery, with a battery capacity of 102.7 kWh and a pure electric cruising range of over 700km under CLTC conditions. At the same time, its charging power can reach up to 500 kilowatts, and it can last 500 kilometers for 12 minutes.

Secondly, in terms of power, the ideal MEGA will be equipped with a dual-motor four-wheel drive system, and the front axle is an asynchronous electric motor with a maximum power of 155 kW; The rear axle is a permanent magnet synchronous motor, with the maximum power of 245 kW, the peak torque of 542 Nm, the comprehensive power of the system of 400 kW and the acceleration time of 100 km of 5.5 seconds. It will also be the ideal first pure electric vehicle. According to the official data, the ideal MEGA is likely to be a fast (accelerated) and long-lasting (endurance) MPV.

Hall 19.2, Floor 2, Zone D

Lan tu Zhu guang PHEV

As the Guangzhou Auto Show is about to kick off, our front team successfully photographed Lantu Zhuguang PHEV around the exhibition hall, which will be officially pre-sold at the Guangzhou Auto Show. Compared with the current pure electric version, the new car is equipped with a plug-in hybrid system consisting of 1.5T and dual motors, equipped with a battery pack with a capacity of 43kW, with a pure electric battery life of 262km and a comprehensive cruising range of 1260km.

In terms of appearance, the main difference between the Lantu light-chasing PHEV model and the pure electric model is reflected in the front face. Due to the addition of the engine, the new car adopts a conventional front grille design, and the interior adopts a similar dot matrix decoration to increase the sense of exquisiteness, while the chrome-plated Lantu LOGO and the through-type light strip are also preserved.

The side of the car body adopts a slip-back shape, equipped with a hidden door handle, and at the same time, a slender chrome decoration is added above the side skirt, and a two-color multi-spoke wheel hub is replaced to emphasize the sense of movement. In terms of body size, the length, width and height of the new car are 5088/1970/1515mm and the wheelbase is 3000mm, which is consistent with the pure electric version.

The tail of the car body is designed with a penetrating taillight, and the internal shape is very exquisite. At the same time, in order to distinguish it from the pure electric version, a similar brake light design is added at the center of the taillight, showing the shape of Lantu LOGO. In addition, equipped with a more radical rear surround, it also adds a sense of movement.

In terms of power, the Lantu Chasing Light PHEV will be equipped with a plug-in hybrid system consisting of a 1.5T engine and front and rear dual motors, in which the maximum power of the engine is 100kW, the maximum power of the front and rear driving motors is 130kW and 160kW respectively, the comprehensive power of the system is 390kW, and the comprehensive torque is 790Nm.

In terms of battery life, it will be equipped with a ternary lithium battery with a capacity of 43 kWh. The pure electric cruising range of CLTC is 262km, and the comprehensive cruising range of CLTC is 1260km when it is fully charged with oil.

In addition, the new car is the only one in its class with all-aluminum chassis and equipped with CDC+ air suspension with magic carpet function, which can actively identify and scan road information, intelligently adjust suspension damping, and give consideration to comfort and sportiness. What’s more worth mentioning is that, in terms of safety, Lantu Chasing Light PHEV, which has not yet been listed, won the "Top Ten Bodies in China in 2023" award last week for its body-in-white performance.

Zhijie S7

It is learned from the official that the first pure electric car jointly built by Huawei Zhixuan and Chery-Zhijie S7 will officially open for pre-sale on November 9, and it is expected to be unveiled at the Guangzhou Auto Show. The new car is built on the brand-new electric platform E0X, which is the same platform as the Star Road Star Era ES, positioning medium and large-sized pure electric cars, equipped with HarmonyOS 4 intelligent cockpit and Huawei ADS 2.0 advanced intelligent assisted driving system.

In terms of appearance, Zhijie S7 adopts a brand-new design language, and the overall style is biased towards sports. The headlight group is similar in shape to Wenjie M9, and its recognition is very high. Whether it will be equipped with HUAWEI xPixel smart headlights remains to be confirmed. The side of the car body is very simple, without a slip-back design, equipped with hidden door handles, lightweight 21-inch double five-spoke wheels and Brembo brake calipers, showing a strong sporty atmosphere; The rear of the car is designed with penetrating taillights to increase the recognition of new cars.

In terms of body size, the length, width and height of Zhijie S7 are 4971/1963/1474mm and the wheelbase is 2950mm, which is much larger than that of Tesla Model 3.

Information about the interior has not been disclosed at present, but it is known that the new car will be equipped with 4(HarmonyOS 4 car engine system and Huawei ADS 2.0 advanced intelligent driver assistance system.

In terms of power, Zhijie S7 will provide single-motor two-wheel drive and dual-motor four-wheel drive models, of which the maximum power of the two-wheel drive model is 215 kW and the maximum power of the four-wheel drive model is 365 kW. In terms of batteries, it will be equipped with lithium iron phosphate battery+ternary lithium battery from Jiangsu Times.

In addition, it is worth mentioning that Yu Chengdong, Huawei’s managing director, terminal BGCEO and chairman of BU, a smart car solution, said in a low-key manner at the new product release of Huawei in autumn this year: the positioning of the intelligent S7 will surpass that of the Tesla Model S, which is indeed much lower-key than the title of "the best SUV within 10 million" of the intellectual M9.

Wen Jie M9

A few days ago, a group of interior spy photos about the world of inquiry M9 were exposed on the Internet. From the pictures, the world of inquiry M9 adopted a triple screen layout, equipped with a brand-new three-spoke steering wheel, and adopted a gear shift, which is obviously different from the current world of inquiry M5 and M7. The interior of the new car is expected to officially meet the masses at the Guangzhou Auto Show.

At the same time, the interior of the new car is decorated with a large number of leather materials, wood grain decorative boards and atmosphere lights, which enhances the luxury atmosphere inside the car.

In addition, according to the previous information, the passenger car M9 will also be equipped with HarmonyOS 4.0 cockpit, Huawei ADS advanced autopilot assistance, aurora projection in the rear row, and queen’s seat in the co-pilot.

In terms of power, Wenjie M9 provides extended-range and pure electric models, in which the extended-range model is equipped with a 1.5T four-cylinder range extender with a maximum power of 112kW, the maximum power of the front drive motor is 165kW, the maximum power of the rear drive motor is 200kW, and it is equipped with a 40.055kW ternary lithium battery pack with a pure electric battery life of 175km.

The pure electric version will be equipped with a dual-motor system, the maximum power of the front motor is 160 kW, and the maximum power of the rear motor is 230 kW. It will be equipped with a ternary lithium battery pack with a capacity of 97.682 kWh and a pure electric cruising range of 630km.

Hall 20.2, Floor 2, Zone D

Gaohe HiPhi A

On November 15, 2023, HiPhi A appeared on the eve of Guangzhou Auto Show, and then officially landed at the Auto Show on November 17. This car will be sold in limited quantities and is expected to be put into production and delivered in the first quarter of 2025.

HiPhi A combines the self-developed technology of Gaohe Automobile and Apollo’s top super-running elements, presenting a futuristic visual style. Carbon fiber material and matte spraying material complement each other, and the front and rear fenders of wide body and ultra-wide tires have strong impact force. The spatial layout subverts the tradition, with sci-fi passion in the front row and spacious and comfortable in the back row. The addition of HiPhi Bot multi-axis displacement robot shows the way of human-vehicle interaction in the digital age.

In terms of performance, the 0-100km/h acceleration of HiPhi A reaches 2 seconds, and the maximum speed is nearly 300 km/h. Based on the 800V platform, the high-power self-developed electric drive assembly has a peak power of 1305Ps. The motor is designed with ultra-high-speed carbon fiber rotor and matched with intelligent oil cooling technology to realize high-power long-time output.

In terms of material application, HIHIA applies aviation grade TC4 titanium alloy to automobile interior and exterior decoration in batches for the first time, and widely uses chassis parts such as high-performance aluminum alloy and nano-ceramics. The cooperation with the Intelligent Manufacturing System Center of Shanghai University of Science and Technology will promote the popularization of 3D printing technology in the automobile industry.

Luxury chassis configurations such as active rear wheel steering, CDC continuously variable damping shock absorber, track-grade carbon ceramic brake disc, etc., lay the foundation for the ultimate control of HIPA. It is equipped with the industry-leading torque vector control technology HVC to improve the handling performance in all directions.

Tucki X9

Compared with the ideal MEGA, the internal and external design of the Tucki X9 vehicle is completely open for everyone to see. It is the new flagship MPV of Xpeng Motors, and the new car will be officially opened for pre-sale at the Guangzhou Auto Show. He Xiaopeng once said that Xpeng Motors will use this model to open the "young" MPV market. In addition to the design will be more dynamic than the conventional MPV, there are also high-order intelligent driving and rear wheel steering blessing.

In order to meet He Xiaopeng’s claim that this is an MPV that opens to a "young state", the design is obviously different from the traditional MPV in business style, and the contour lines of the front and rear are more streamlined. The designer hopes to attract the favor of young consumers with this avant-garde design.

Family-style design language is adopted in the front of the car, the closed front face is equipped with penetrating LED headlights, and laser radars are arranged on both sides of the front enclosure; The side creates a visual effect of the suspended roof, which adds a sense of movement; The tail is full and round, equipped with through taillight design, with more three-dimensional lines, showing a certain sense of hierarchy.

The length, width and height dimensions of Tucki X9 are 5293/1988/1785mm and the wheelbase is 3160mm respectively. In terms of wheels and tires, the new car offers 19-inch and 20-inch wheels, and the tires are 235/55 R19 and 235/50 R20.

The layout of the interior is simple and simple, and the physical buttons are basically cancelled, leaving only the multi-function buttons on the steering wheel; In-vehicle functions are integrated into the large-size central control panel. It is worth noting that the central control panel supports split-screen display, while the co-driver is not equipped with a display screen. The air outlet of the air conditioner is designed with dense hollow holes, which is sci-fi; Due to the forward design of the front windshield, the front area of the center console is very large, which can theoretically make the front view more transparent.

In terms of science and technology, Tucki X9 will take the lead in carrying Qualcomm’s latest generation of 8295 intelligent cockpit chips, which will not only upgrade from 7nm process technology of 8155 chips to 5nm, but also greatly improve high-performance computing and AI processing. The NPU computing power for AI learning will reach 30TOPS OPS, which is 8 times that of 8155 chips. I believe that cockpit interaction will be qualitatively improved. In addition, X9 in Tucki will also be equipped with Xmart OS 5.0 system for the first time, which will adopt a brand-new interface (multi-tasking, customization), one-stop SR (improving driving safety and covering parking scenes), fully evolved voice interaction ability, no wake-up six-tone zone and access to GPT model.

XNGP intelligent assisted driving is also the strongest combination in Tucki at present, with dual NVIDIA Orin-X chips, maximum computing power of 508TOPS and dual laser radars. XNGP function can be used upon expected delivery.

2+2+3 "three rows of seats layout, the interior area of the car reaches 7.7㎡. Thanks to the large body size and excellent spatial layout, the head and leg space of the three rows of seats in the car are very prominent; The second row of the new car is designed with independent seats. The leather-covered seats are equipped with leg rests and independent handrails. The width of the central passage reaches 180mm and the height of entry and exit reaches 1315mm, which is convenient for the occupants in the car to enter and exit the third row.

The third row of seats also has a one-button electric storage function, which can form a fully flat trunk space after storage, which is convenient for loading large luggage items.

Tucki X9, like G9 and G6 in Tucki before, is built with Tucki’s soaring architecture and 800V high-voltage platform. It is estimated that 800V architecture will bring lower energy consumption performance and longer endurance. Tucki X9 will be available in single-motor and dual-motor versions. Among them, the maximum power of the motor after the two-drive version is 235kW. The maximum power of the front motor of the four-wheel drive version is 135kW, and the maximum power of the rear motor is 235kW. The new car will be equipped with rear wheel steering as standard, which will greatly improve driving flexibility. The battery is a ternary lithium-ion battery from Zhongchuang Singapore Airlines.

Ticket information

The 21st Guangzhou Auto Show will be held in the Canton Fair Exhibition Hall from November 17th, 2023 to November 26th, 2023. The exhibition area of auto parts and supplies, auto modification and new technology will be extended from November 17th to 20th, 2023.

November 17th, 2023 is Media Day, which is only open to domestic and foreign media and special guests. November 18-19, 2023 is the Professional Audience Day, and the ticket is 100 yuan; November 20-26, 2023 is a public day, and the ticket is 50 yuan. This year’s exhibition will continue to use real-name registration system certification and swipe the ID card to enter the exhibition. Visitors can complete ticket purchase, ticket activation and real-name authentication at one time through the official WeChat of Guangzhou International Auto Show.

At present, tickets for Guangzhou Auto Show are on sale. You can buy them in WeChat official account after paying attention to Guangzhou International Auto Show, providing electronic tickets and physical tickets, and supporting online payment by UnionPay and Alipay. Tickets are sold without refund or exchange. Please confirm that you can arrive at the exhibition site on the visit day of the corresponding ticket category before purchasing tickets. One ticket is limited to one person and valid once. There are no tickets for the elderly and children in the exhibition, and all visitors need to enter the exhibition with tickets.

Tickets for 100 yuan can be used on any day from November 20th to 28th.

Children under 1.4 meters are free of charge and need adult supervision, and they can only enter the venue with their ID cards.

Auto show public transportation

subway

Bus route

Airport to the exhibition hall

The Canton Fair Exhibition Hall is about 50 kilometers (driving distance) from Guangzhou Baiyun International Airport Terminal 1 and Terminal 2, and you can take the subway to the auto show site.

Guangzhou Baiyun International Airport Terminals 1 and 2-Canton Fair Exhibition Hall

Subway: the north extension of Line 3-transfer to Line 3 at Tiyu West Road Station-transfer to Line 8 at Kecun Station to Pazhou Subway Station.

Taxi: about 1 hour (when the traffic is smooth)

Guangzhou South Railway Station to the Exhibition Hall

The Canton Fair Exhibition Hall is about 23 kilometers away from Guangzhou South Railway Station (driving distance), and you can take the subway to the auto show site.

Guangzhou South Railway Station-Canton Fair Exhibition Hall

Subway: Line 2-take Changgang Station and transfer to Line 8-take Pazhou Subway Station.

Taxi: about 1 hour (when the traffic is smooth)

Travel by car

Self-driving spectators can park their vehicles in the designated parking lot of the Canton Fair Exhibition Hall. After parking, please record the parking lot and parking location and go to the exhibition hall according to the on-site guidance signs.

summary

There are quite a few heavy new cars worth seeing at this Guangzhou Auto Show. Regarding the first-hand hot spots of new cars at the auto show, we Pacific Auto Network will also send a group of professional editors to the scene to provide you with the freshest and hot auto show information at the first time, so please pay attention.